Questions about REST API Forum - Published: I have some internal applications that use Ruby on Rails where I’d like to integrate some data from our Opto controllers. Has anybody written a wrapper class for the REST API that they’re happy with...moreI have some internal applications that use Ruby on Rails where I’d like to integrate some data from our Opto controllers. Has anybody written a wrapper class for the REST API that they’re happy with (even if not in Ruby)? Or is there some other way I should be going about this?... <less What have you been building? Forum - Published: Hi OptoFans, Lately I’ve been blogging about some of my favorite favorite Opto Applications (see links below). Hoping you’ll share some of yours. Or course I’d be especially excited to hear about those...moreHi OptoFans, Lately I’ve been blogging about some of my favorite favorite Opto Applications (see links below). Hoping you’ll share some of yours. Or course I’d be especially excited to hear about those where I might’ve helped you at some point in the development! Feel free to post here or send me a message privately. I can’t promise I’ll blog about all of it (or show up at your doorstep to learn more!) but you never know… Cheers, OptoMary blog.opto22.com Adventures ...... <less Using Opto22 and HART to monitor temperature inputs for 500hp motors Forum - Published: Using two Moore Industries TCMs, we are monitoring 32 temperature sensors inside four 500hp pump motors. It is communicating with the Opto22 PAC-R1 controller via HART protocol using an HES device. Since...moreUsing two Moore Industries TCMs, we are monitoring 32 temperature sensors inside four 500hp pump motors. It is communicating with the Opto22 PAC-R1 controller via HART protocol using an HES device. Since we implemented this system, no motors have been lost due to thermal overload, saving the customer hundreds of thousands of dollars and countless hours of unplanned down time. To find out more, come check out our blog where we discuss some of our projects and applications using Opto22. ...... <less Groov to Modbus TCP in .NET Application Forum - Published: So we have existing applications involving PC-based automation using SNAP Brains and I/O. The PC program, which we wrote, communicates with the Brains using the .NET class library and handles all...moreSo we have existing applications involving PC-based automation using SNAP Brains and I/O. The PC program, which we wrote, communicates with the Brains using the .NET class library and handles all control. Recently, customers have expressed interest in a mobile app that would allow them to view their process and equipment status. My thought is to use a groov connected to our program via Modbus TCP. We can include a Modbus server in our application using .NET libraries like this one (FieldTalk ...... <less .NET Library SDK and .NET 5 Forum - Published: Hey guys, Just wondering if there is any planned support for the newer .NET 5. We use Opto22’s .NET library for one of our applications, and that might dictate our direction as it looks like .NET 5 and...moreHey guys, Just wondering if there is any planned support for the newer .NET 5. We use Opto22’s .NET library for one of our applications, and that might dictate our direction as it looks like .NET 5 and on is going to be the future of that ecosystem/framework. I did try it out on .NET 5 - Everything compiled OK when I migrated, but I was unable to open TCP connections to Opto devices (UDP worked though). That was the extent of my testing though. Thanks, -Peter... <less Installing 'node-red-contrib-oracledb' fails Forum - Published: I tried to install the node-red-contrib-oracledb node so I could read/write to our Oracle DB. I have setup the oracledb node module (see install instructions here: https://github.com/oracle/node-oracledb...moreI tried to install the node-red-contrib-oracledb node so I could read/write to our Oracle DB. I have setup the oracledb node module (see install instructions here: https://github.com/oracle/node-oracledb/blob/master/INSTALL.md) using traditional node applications in the past and the issue is that it needs access to a couple of oracle provided libraries to complete the install. I assume this means I would need command line access to the groovBox to be able to make this install work… is command li...... <less Decode Sparkplug Encoded MQTT Messages with Node-RED Forum - Published: If you want a Sparkplug-compliant client to read in data two of the best options out there are Ignition Edge and MQTT.fx, but sometimes I need something that lies between these two applications — this...moreIf you want a Sparkplug-compliant client to read in data two of the best options out there are Ignition Edge and MQTT.fx, but sometimes I need something that lies between these two applications — this is where Node-RED comes in. Using Node-RED it’s possible to read in and decode Sparkplug messages right in your flow, then you can easily move that data into any other Node-RED endpoint, whether it’s groov View, a database, or even cloud analytic software. Using this method Node-RED does not becom...... <less Send an email from a controller Forum - Published: This got covered over in a post in the ‘Applications’ forum, but I felt it worth putting in here as well. While the scratchpad is the main way to send an email from a PAC Controller, its not the only way...moreThis got covered over in a post in the ‘Applications’ forum, but I felt it worth putting in here as well. While the scratchpad is the main way to send an email from a PAC Controller, its not the only way… There is another; Use a chart to talk to your email server. This is pretty powerful as we are all very used to working in charts and they are nice and easy to debug. Here is some code that we have been working with on and off for a little while. It works well, we have had a few users get it up ...... <less PacDisplay on Intel Compute Stick? Forum - Published: Does anybody have any experience to share whether PacDisplay will run on an Atom-based Intel Compute Stick? I have an existing project where the user would like a couple of tag values shown on a large...moreDoes anybody have any experience to share whether PacDisplay will run on an Atom-based Intel Compute Stick? I have an existing project where the user would like a couple of tag values shown on a large display. I am wondering if an Intel STK1AW32SC Compute Stick and flat panel TV would be the answer. Thanks.... <less A minor question Forum - Published: A minor question My client asked me. Why is it called “Groov”? What’s special about it?...A minor question My client asked me. Why is it called “Groov”? What’s special about it?... <less Look, Ma, no I/O! Fun things you can do with PAC + IP Forum - Published: Hi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and...moreHi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and connections to the real world go to Ben instead of me (hopefully that’s due to his extensive real-world experience rather than those rumors about my causing fires). What types of no-I/O things are they doing, you ask? There was this ftp example which took advantage of a sensor in a camera and the F...... <less Pac R1 to Automation Direct C More HMI through Modbus Forum - Published: I have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the...moreI have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the modbus integration kit. For testing purposes we are just using the supplied strategy from the modbus integration kit. Good news: Coils and Ints work fine. Bad news: When entering a float variable on the HMI it goes into the Int holding table over two consecutive values, not to the float holding t...... <less ICTD module used in real world applications Forum - Published: Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?...Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?... <less PAC-R2 communicating via Ethernet/IP, CC-LinkV2 or DeviceNet Forum - Published: Hello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence...moreHello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence rep and he told we could Use a network communication module and then send configuration settings from your controller (PAC-R2) It looks like I would need to add a Keyence NU Series module. It supports the following protocols: Ethernet/IP CC-LinkV2 DeviceNet EtherCat OK, so this all sounds grea...... <less Latching inputs on RIO Forum - Published: Would it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1...moreWould it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1 without having to poll at a high rate. Unfortunately I need more than two of these.... <less Opto22 to check Ping Status Forum - Published: Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?...Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?... <less Upcoming groov webinar: "Building Mobile Interfaces for Industrial Applications" Forum - Published: It’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov...moreIt’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov.” Missed this? You can always [B]watch the archive.[/B] Date: Tuesday, September 10, 2013 Time: 9:00 a.m. to 9:30 a.m. PDT Key points in the webinar: Find out which mobile devices are supported by [I]groov[/I] See the difference between desktop and handheld view Learn best practices for designing m...... <less Noob question about wireless distances Forum - Published: I’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems...moreI’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems PLC SCADA system). How does Opto’s wireless compare? Two applications I am looking at are: (1) a water utility with two treatment plants, two remote tanks, & eleven remote wells. Distances are one to five miles, with line of sight and (2) a wastewater system with one plant and 30 lift stations sca...... <less Using Port 502 for Modbus Clients on groov Devices Forum - Published: Both groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I...moreBoth groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I/O or scratchpad data out of any of the groov devices to a ModbusTCP master on your local network. TIP. If you need a PAC Control variable available via Modbus, just write the variable to a scratchpad location and use the groov Manager Modbus calculator to get the device ID and register address of t...... <less Infomations Snap-Pac Brain Forum - Published: Hello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from...moreHello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from groov epic to snap-pac brain. So, my questions are the following: Can the snap pac brain be programmed through Node-red? Can I set the time zone (region Etc and Locality UTC) in the snap pac brain? Can I open the LAN port for TCP/IP communication in the snap pac brain? Thanks Giammarco... <less Groov RIO nodered error Forum - Published: Hi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO...moreHi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO with Node-Red after this error then I must restart the RIO then the flow will start again. Thanks.... <less EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
What have you been building? Forum - Published: Hi OptoFans, Lately I’ve been blogging about some of my favorite favorite Opto Applications (see links below). Hoping you’ll share some of yours. Or course I’d be especially excited to hear about those...moreHi OptoFans, Lately I’ve been blogging about some of my favorite favorite Opto Applications (see links below). Hoping you’ll share some of yours. Or course I’d be especially excited to hear about those where I might’ve helped you at some point in the development! Feel free to post here or send me a message privately. I can’t promise I’ll blog about all of it (or show up at your doorstep to learn more!) but you never know… Cheers, OptoMary blog.opto22.com Adventures ...... <less Using Opto22 and HART to monitor temperature inputs for 500hp motors Forum - Published: Using two Moore Industries TCMs, we are monitoring 32 temperature sensors inside four 500hp pump motors. It is communicating with the Opto22 PAC-R1 controller via HART protocol using an HES device. Since...moreUsing two Moore Industries TCMs, we are monitoring 32 temperature sensors inside four 500hp pump motors. It is communicating with the Opto22 PAC-R1 controller via HART protocol using an HES device. Since we implemented this system, no motors have been lost due to thermal overload, saving the customer hundreds of thousands of dollars and countless hours of unplanned down time. To find out more, come check out our blog where we discuss some of our projects and applications using Opto22. ...... <less Groov to Modbus TCP in .NET Application Forum - Published: So we have existing applications involving PC-based automation using SNAP Brains and I/O. The PC program, which we wrote, communicates with the Brains using the .NET class library and handles all...moreSo we have existing applications involving PC-based automation using SNAP Brains and I/O. The PC program, which we wrote, communicates with the Brains using the .NET class library and handles all control. Recently, customers have expressed interest in a mobile app that would allow them to view their process and equipment status. My thought is to use a groov connected to our program via Modbus TCP. We can include a Modbus server in our application using .NET libraries like this one (FieldTalk ...... <less .NET Library SDK and .NET 5 Forum - Published: Hey guys, Just wondering if there is any planned support for the newer .NET 5. We use Opto22’s .NET library for one of our applications, and that might dictate our direction as it looks like .NET 5 and...moreHey guys, Just wondering if there is any planned support for the newer .NET 5. We use Opto22’s .NET library for one of our applications, and that might dictate our direction as it looks like .NET 5 and on is going to be the future of that ecosystem/framework. I did try it out on .NET 5 - Everything compiled OK when I migrated, but I was unable to open TCP connections to Opto devices (UDP worked though). That was the extent of my testing though. Thanks, -Peter... <less Installing 'node-red-contrib-oracledb' fails Forum - Published: I tried to install the node-red-contrib-oracledb node so I could read/write to our Oracle DB. I have setup the oracledb node module (see install instructions here: https://github.com/oracle/node-oracledb...moreI tried to install the node-red-contrib-oracledb node so I could read/write to our Oracle DB. I have setup the oracledb node module (see install instructions here: https://github.com/oracle/node-oracledb/blob/master/INSTALL.md) using traditional node applications in the past and the issue is that it needs access to a couple of oracle provided libraries to complete the install. I assume this means I would need command line access to the groovBox to be able to make this install work… is command li...... <less Decode Sparkplug Encoded MQTT Messages with Node-RED Forum - Published: If you want a Sparkplug-compliant client to read in data two of the best options out there are Ignition Edge and MQTT.fx, but sometimes I need something that lies between these two applications — this...moreIf you want a Sparkplug-compliant client to read in data two of the best options out there are Ignition Edge and MQTT.fx, but sometimes I need something that lies between these two applications — this is where Node-RED comes in. Using Node-RED it’s possible to read in and decode Sparkplug messages right in your flow, then you can easily move that data into any other Node-RED endpoint, whether it’s groov View, a database, or even cloud analytic software. Using this method Node-RED does not becom...... <less Send an email from a controller Forum - Published: This got covered over in a post in the ‘Applications’ forum, but I felt it worth putting in here as well. While the scratchpad is the main way to send an email from a PAC Controller, its not the only way...moreThis got covered over in a post in the ‘Applications’ forum, but I felt it worth putting in here as well. While the scratchpad is the main way to send an email from a PAC Controller, its not the only way… There is another; Use a chart to talk to your email server. This is pretty powerful as we are all very used to working in charts and they are nice and easy to debug. Here is some code that we have been working with on and off for a little while. It works well, we have had a few users get it up ...... <less PacDisplay on Intel Compute Stick? Forum - Published: Does anybody have any experience to share whether PacDisplay will run on an Atom-based Intel Compute Stick? I have an existing project where the user would like a couple of tag values shown on a large...moreDoes anybody have any experience to share whether PacDisplay will run on an Atom-based Intel Compute Stick? I have an existing project where the user would like a couple of tag values shown on a large display. I am wondering if an Intel STK1AW32SC Compute Stick and flat panel TV would be the answer. Thanks.... <less A minor question Forum - Published: A minor question My client asked me. Why is it called “Groov”? What’s special about it?...A minor question My client asked me. Why is it called “Groov”? What’s special about it?... <less Look, Ma, no I/O! Fun things you can do with PAC + IP Forum - Published: Hi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and...moreHi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and connections to the real world go to Ben instead of me (hopefully that’s due to his extensive real-world experience rather than those rumors about my causing fires). What types of no-I/O things are they doing, you ask? There was this ftp example which took advantage of a sensor in a camera and the F...... <less Pac R1 to Automation Direct C More HMI through Modbus Forum - Published: I have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the...moreI have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the modbus integration kit. For testing purposes we are just using the supplied strategy from the modbus integration kit. Good news: Coils and Ints work fine. Bad news: When entering a float variable on the HMI it goes into the Int holding table over two consecutive values, not to the float holding t...... <less ICTD module used in real world applications Forum - Published: Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?...Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?... <less PAC-R2 communicating via Ethernet/IP, CC-LinkV2 or DeviceNet Forum - Published: Hello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence...moreHello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence rep and he told we could Use a network communication module and then send configuration settings from your controller (PAC-R2) It looks like I would need to add a Keyence NU Series module. It supports the following protocols: Ethernet/IP CC-LinkV2 DeviceNet EtherCat OK, so this all sounds grea...... <less Latching inputs on RIO Forum - Published: Would it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1...moreWould it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1 without having to poll at a high rate. Unfortunately I need more than two of these.... <less Opto22 to check Ping Status Forum - Published: Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?...Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?... <less Upcoming groov webinar: "Building Mobile Interfaces for Industrial Applications" Forum - Published: It’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov...moreIt’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov.” Missed this? You can always [B]watch the archive.[/B] Date: Tuesday, September 10, 2013 Time: 9:00 a.m. to 9:30 a.m. PDT Key points in the webinar: Find out which mobile devices are supported by [I]groov[/I] See the difference between desktop and handheld view Learn best practices for designing m...... <less Noob question about wireless distances Forum - Published: I’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems...moreI’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems PLC SCADA system). How does Opto’s wireless compare? Two applications I am looking at are: (1) a water utility with two treatment plants, two remote tanks, & eleven remote wells. Distances are one to five miles, with line of sight and (2) a wastewater system with one plant and 30 lift stations sca...... <less Using Port 502 for Modbus Clients on groov Devices Forum - Published: Both groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I...moreBoth groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I/O or scratchpad data out of any of the groov devices to a ModbusTCP master on your local network. TIP. If you need a PAC Control variable available via Modbus, just write the variable to a scratchpad location and use the groov Manager Modbus calculator to get the device ID and register address of t...... <less Infomations Snap-Pac Brain Forum - Published: Hello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from...moreHello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from groov epic to snap-pac brain. So, my questions are the following: Can the snap pac brain be programmed through Node-red? Can I set the time zone (region Etc and Locality UTC) in the snap pac brain? Can I open the LAN port for TCP/IP communication in the snap pac brain? Thanks Giammarco... <less Groov RIO nodered error Forum - Published: Hi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO...moreHi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO with Node-Red after this error then I must restart the RIO then the flow will start again. Thanks.... <less EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
Using Opto22 and HART to monitor temperature inputs for 500hp motors Forum - Published: Using two Moore Industries TCMs, we are monitoring 32 temperature sensors inside four 500hp pump motors. It is communicating with the Opto22 PAC-R1 controller via HART protocol using an HES device. Since...moreUsing two Moore Industries TCMs, we are monitoring 32 temperature sensors inside four 500hp pump motors. It is communicating with the Opto22 PAC-R1 controller via HART protocol using an HES device. Since we implemented this system, no motors have been lost due to thermal overload, saving the customer hundreds of thousands of dollars and countless hours of unplanned down time. To find out more, come check out our blog where we discuss some of our projects and applications using Opto22. ...... <less Groov to Modbus TCP in .NET Application Forum - Published: So we have existing applications involving PC-based automation using SNAP Brains and I/O. The PC program, which we wrote, communicates with the Brains using the .NET class library and handles all...moreSo we have existing applications involving PC-based automation using SNAP Brains and I/O. The PC program, which we wrote, communicates with the Brains using the .NET class library and handles all control. Recently, customers have expressed interest in a mobile app that would allow them to view their process and equipment status. My thought is to use a groov connected to our program via Modbus TCP. We can include a Modbus server in our application using .NET libraries like this one (FieldTalk ...... <less .NET Library SDK and .NET 5 Forum - Published: Hey guys, Just wondering if there is any planned support for the newer .NET 5. We use Opto22’s .NET library for one of our applications, and that might dictate our direction as it looks like .NET 5 and...moreHey guys, Just wondering if there is any planned support for the newer .NET 5. We use Opto22’s .NET library for one of our applications, and that might dictate our direction as it looks like .NET 5 and on is going to be the future of that ecosystem/framework. I did try it out on .NET 5 - Everything compiled OK when I migrated, but I was unable to open TCP connections to Opto devices (UDP worked though). That was the extent of my testing though. Thanks, -Peter... <less Installing 'node-red-contrib-oracledb' fails Forum - Published: I tried to install the node-red-contrib-oracledb node so I could read/write to our Oracle DB. I have setup the oracledb node module (see install instructions here: https://github.com/oracle/node-oracledb...moreI tried to install the node-red-contrib-oracledb node so I could read/write to our Oracle DB. I have setup the oracledb node module (see install instructions here: https://github.com/oracle/node-oracledb/blob/master/INSTALL.md) using traditional node applications in the past and the issue is that it needs access to a couple of oracle provided libraries to complete the install. I assume this means I would need command line access to the groovBox to be able to make this install work… is command li...... <less Decode Sparkplug Encoded MQTT Messages with Node-RED Forum - Published: If you want a Sparkplug-compliant client to read in data two of the best options out there are Ignition Edge and MQTT.fx, but sometimes I need something that lies between these two applications — this...moreIf you want a Sparkplug-compliant client to read in data two of the best options out there are Ignition Edge and MQTT.fx, but sometimes I need something that lies between these two applications — this is where Node-RED comes in. Using Node-RED it’s possible to read in and decode Sparkplug messages right in your flow, then you can easily move that data into any other Node-RED endpoint, whether it’s groov View, a database, or even cloud analytic software. Using this method Node-RED does not becom...... <less Send an email from a controller Forum - Published: This got covered over in a post in the ‘Applications’ forum, but I felt it worth putting in here as well. While the scratchpad is the main way to send an email from a PAC Controller, its not the only way...moreThis got covered over in a post in the ‘Applications’ forum, but I felt it worth putting in here as well. While the scratchpad is the main way to send an email from a PAC Controller, its not the only way… There is another; Use a chart to talk to your email server. This is pretty powerful as we are all very used to working in charts and they are nice and easy to debug. Here is some code that we have been working with on and off for a little while. It works well, we have had a few users get it up ...... <less PacDisplay on Intel Compute Stick? Forum - Published: Does anybody have any experience to share whether PacDisplay will run on an Atom-based Intel Compute Stick? I have an existing project where the user would like a couple of tag values shown on a large...moreDoes anybody have any experience to share whether PacDisplay will run on an Atom-based Intel Compute Stick? I have an existing project where the user would like a couple of tag values shown on a large display. I am wondering if an Intel STK1AW32SC Compute Stick and flat panel TV would be the answer. Thanks.... <less A minor question Forum - Published: A minor question My client asked me. Why is it called “Groov”? What’s special about it?...A minor question My client asked me. Why is it called “Groov”? What’s special about it?... <less Look, Ma, no I/O! Fun things you can do with PAC + IP Forum - Published: Hi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and...moreHi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and connections to the real world go to Ben instead of me (hopefully that’s due to his extensive real-world experience rather than those rumors about my causing fires). What types of no-I/O things are they doing, you ask? There was this ftp example which took advantage of a sensor in a camera and the F...... <less Pac R1 to Automation Direct C More HMI through Modbus Forum - Published: I have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the...moreI have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the modbus integration kit. For testing purposes we are just using the supplied strategy from the modbus integration kit. Good news: Coils and Ints work fine. Bad news: When entering a float variable on the HMI it goes into the Int holding table over two consecutive values, not to the float holding t...... <less ICTD module used in real world applications Forum - Published: Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?...Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?... <less PAC-R2 communicating via Ethernet/IP, CC-LinkV2 or DeviceNet Forum - Published: Hello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence...moreHello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence rep and he told we could Use a network communication module and then send configuration settings from your controller (PAC-R2) It looks like I would need to add a Keyence NU Series module. It supports the following protocols: Ethernet/IP CC-LinkV2 DeviceNet EtherCat OK, so this all sounds grea...... <less Latching inputs on RIO Forum - Published: Would it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1...moreWould it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1 without having to poll at a high rate. Unfortunately I need more than two of these.... <less Opto22 to check Ping Status Forum - Published: Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?...Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?... <less Upcoming groov webinar: "Building Mobile Interfaces for Industrial Applications" Forum - Published: It’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov...moreIt’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov.” Missed this? You can always [B]watch the archive.[/B] Date: Tuesday, September 10, 2013 Time: 9:00 a.m. to 9:30 a.m. PDT Key points in the webinar: Find out which mobile devices are supported by [I]groov[/I] See the difference between desktop and handheld view Learn best practices for designing m...... <less Noob question about wireless distances Forum - Published: I’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems...moreI’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems PLC SCADA system). How does Opto’s wireless compare? Two applications I am looking at are: (1) a water utility with two treatment plants, two remote tanks, & eleven remote wells. Distances are one to five miles, with line of sight and (2) a wastewater system with one plant and 30 lift stations sca...... <less Using Port 502 for Modbus Clients on groov Devices Forum - Published: Both groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I...moreBoth groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I/O or scratchpad data out of any of the groov devices to a ModbusTCP master on your local network. TIP. If you need a PAC Control variable available via Modbus, just write the variable to a scratchpad location and use the groov Manager Modbus calculator to get the device ID and register address of t...... <less Infomations Snap-Pac Brain Forum - Published: Hello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from...moreHello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from groov epic to snap-pac brain. So, my questions are the following: Can the snap pac brain be programmed through Node-red? Can I set the time zone (region Etc and Locality UTC) in the snap pac brain? Can I open the LAN port for TCP/IP communication in the snap pac brain? Thanks Giammarco... <less Groov RIO nodered error Forum - Published: Hi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO...moreHi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO with Node-Red after this error then I must restart the RIO then the flow will start again. Thanks.... <less EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
Groov to Modbus TCP in .NET Application Forum - Published: So we have existing applications involving PC-based automation using SNAP Brains and I/O. The PC program, which we wrote, communicates with the Brains using the .NET class library and handles all...moreSo we have existing applications involving PC-based automation using SNAP Brains and I/O. The PC program, which we wrote, communicates with the Brains using the .NET class library and handles all control. Recently, customers have expressed interest in a mobile app that would allow them to view their process and equipment status. My thought is to use a groov connected to our program via Modbus TCP. We can include a Modbus server in our application using .NET libraries like this one (FieldTalk ...... <less .NET Library SDK and .NET 5 Forum - Published: Hey guys, Just wondering if there is any planned support for the newer .NET 5. We use Opto22’s .NET library for one of our applications, and that might dictate our direction as it looks like .NET 5 and...moreHey guys, Just wondering if there is any planned support for the newer .NET 5. We use Opto22’s .NET library for one of our applications, and that might dictate our direction as it looks like .NET 5 and on is going to be the future of that ecosystem/framework. I did try it out on .NET 5 - Everything compiled OK when I migrated, but I was unable to open TCP connections to Opto devices (UDP worked though). That was the extent of my testing though. Thanks, -Peter... <less Installing 'node-red-contrib-oracledb' fails Forum - Published: I tried to install the node-red-contrib-oracledb node so I could read/write to our Oracle DB. I have setup the oracledb node module (see install instructions here: https://github.com/oracle/node-oracledb...moreI tried to install the node-red-contrib-oracledb node so I could read/write to our Oracle DB. I have setup the oracledb node module (see install instructions here: https://github.com/oracle/node-oracledb/blob/master/INSTALL.md) using traditional node applications in the past and the issue is that it needs access to a couple of oracle provided libraries to complete the install. I assume this means I would need command line access to the groovBox to be able to make this install work… is command li...... <less Decode Sparkplug Encoded MQTT Messages with Node-RED Forum - Published: If you want a Sparkplug-compliant client to read in data two of the best options out there are Ignition Edge and MQTT.fx, but sometimes I need something that lies between these two applications — this...moreIf you want a Sparkplug-compliant client to read in data two of the best options out there are Ignition Edge and MQTT.fx, but sometimes I need something that lies between these two applications — this is where Node-RED comes in. Using Node-RED it’s possible to read in and decode Sparkplug messages right in your flow, then you can easily move that data into any other Node-RED endpoint, whether it’s groov View, a database, or even cloud analytic software. Using this method Node-RED does not becom...... <less Send an email from a controller Forum - Published: This got covered over in a post in the ‘Applications’ forum, but I felt it worth putting in here as well. While the scratchpad is the main way to send an email from a PAC Controller, its not the only way...moreThis got covered over in a post in the ‘Applications’ forum, but I felt it worth putting in here as well. While the scratchpad is the main way to send an email from a PAC Controller, its not the only way… There is another; Use a chart to talk to your email server. This is pretty powerful as we are all very used to working in charts and they are nice and easy to debug. Here is some code that we have been working with on and off for a little while. It works well, we have had a few users get it up ...... <less PacDisplay on Intel Compute Stick? Forum - Published: Does anybody have any experience to share whether PacDisplay will run on an Atom-based Intel Compute Stick? I have an existing project where the user would like a couple of tag values shown on a large...moreDoes anybody have any experience to share whether PacDisplay will run on an Atom-based Intel Compute Stick? I have an existing project where the user would like a couple of tag values shown on a large display. I am wondering if an Intel STK1AW32SC Compute Stick and flat panel TV would be the answer. Thanks.... <less A minor question Forum - Published: A minor question My client asked me. Why is it called “Groov”? What’s special about it?...A minor question My client asked me. Why is it called “Groov”? What’s special about it?... <less Look, Ma, no I/O! Fun things you can do with PAC + IP Forum - Published: Hi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and...moreHi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and connections to the real world go to Ben instead of me (hopefully that’s due to his extensive real-world experience rather than those rumors about my causing fires). What types of no-I/O things are they doing, you ask? There was this ftp example which took advantage of a sensor in a camera and the F...... <less Pac R1 to Automation Direct C More HMI through Modbus Forum - Published: I have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the...moreI have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the modbus integration kit. For testing purposes we are just using the supplied strategy from the modbus integration kit. Good news: Coils and Ints work fine. Bad news: When entering a float variable on the HMI it goes into the Int holding table over two consecutive values, not to the float holding t...... <less ICTD module used in real world applications Forum - Published: Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?...Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?... <less PAC-R2 communicating via Ethernet/IP, CC-LinkV2 or DeviceNet Forum - Published: Hello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence...moreHello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence rep and he told we could Use a network communication module and then send configuration settings from your controller (PAC-R2) It looks like I would need to add a Keyence NU Series module. It supports the following protocols: Ethernet/IP CC-LinkV2 DeviceNet EtherCat OK, so this all sounds grea...... <less Latching inputs on RIO Forum - Published: Would it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1...moreWould it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1 without having to poll at a high rate. Unfortunately I need more than two of these.... <less Opto22 to check Ping Status Forum - Published: Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?...Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?... <less Upcoming groov webinar: "Building Mobile Interfaces for Industrial Applications" Forum - Published: It’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov...moreIt’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov.” Missed this? You can always [B]watch the archive.[/B] Date: Tuesday, September 10, 2013 Time: 9:00 a.m. to 9:30 a.m. PDT Key points in the webinar: Find out which mobile devices are supported by [I]groov[/I] See the difference between desktop and handheld view Learn best practices for designing m...... <less Noob question about wireless distances Forum - Published: I’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems...moreI’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems PLC SCADA system). How does Opto’s wireless compare? Two applications I am looking at are: (1) a water utility with two treatment plants, two remote tanks, & eleven remote wells. Distances are one to five miles, with line of sight and (2) a wastewater system with one plant and 30 lift stations sca...... <less Using Port 502 for Modbus Clients on groov Devices Forum - Published: Both groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I...moreBoth groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I/O or scratchpad data out of any of the groov devices to a ModbusTCP master on your local network. TIP. If you need a PAC Control variable available via Modbus, just write the variable to a scratchpad location and use the groov Manager Modbus calculator to get the device ID and register address of t...... <less Infomations Snap-Pac Brain Forum - Published: Hello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from...moreHello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from groov epic to snap-pac brain. So, my questions are the following: Can the snap pac brain be programmed through Node-red? Can I set the time zone (region Etc and Locality UTC) in the snap pac brain? Can I open the LAN port for TCP/IP communication in the snap pac brain? Thanks Giammarco... <less Groov RIO nodered error Forum - Published: Hi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO...moreHi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO with Node-Red after this error then I must restart the RIO then the flow will start again. Thanks.... <less EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
.NET Library SDK and .NET 5 Forum - Published: Hey guys, Just wondering if there is any planned support for the newer .NET 5. We use Opto22’s .NET library for one of our applications, and that might dictate our direction as it looks like .NET 5 and...moreHey guys, Just wondering if there is any planned support for the newer .NET 5. We use Opto22’s .NET library for one of our applications, and that might dictate our direction as it looks like .NET 5 and on is going to be the future of that ecosystem/framework. I did try it out on .NET 5 - Everything compiled OK when I migrated, but I was unable to open TCP connections to Opto devices (UDP worked though). That was the extent of my testing though. Thanks, -Peter... <less Installing 'node-red-contrib-oracledb' fails Forum - Published: I tried to install the node-red-contrib-oracledb node so I could read/write to our Oracle DB. I have setup the oracledb node module (see install instructions here: https://github.com/oracle/node-oracledb...moreI tried to install the node-red-contrib-oracledb node so I could read/write to our Oracle DB. I have setup the oracledb node module (see install instructions here: https://github.com/oracle/node-oracledb/blob/master/INSTALL.md) using traditional node applications in the past and the issue is that it needs access to a couple of oracle provided libraries to complete the install. I assume this means I would need command line access to the groovBox to be able to make this install work… is command li...... <less Decode Sparkplug Encoded MQTT Messages with Node-RED Forum - Published: If you want a Sparkplug-compliant client to read in data two of the best options out there are Ignition Edge and MQTT.fx, but sometimes I need something that lies between these two applications — this...moreIf you want a Sparkplug-compliant client to read in data two of the best options out there are Ignition Edge and MQTT.fx, but sometimes I need something that lies between these two applications — this is where Node-RED comes in. Using Node-RED it’s possible to read in and decode Sparkplug messages right in your flow, then you can easily move that data into any other Node-RED endpoint, whether it’s groov View, a database, or even cloud analytic software. Using this method Node-RED does not becom...... <less Send an email from a controller Forum - Published: This got covered over in a post in the ‘Applications’ forum, but I felt it worth putting in here as well. While the scratchpad is the main way to send an email from a PAC Controller, its not the only way...moreThis got covered over in a post in the ‘Applications’ forum, but I felt it worth putting in here as well. While the scratchpad is the main way to send an email from a PAC Controller, its not the only way… There is another; Use a chart to talk to your email server. This is pretty powerful as we are all very used to working in charts and they are nice and easy to debug. Here is some code that we have been working with on and off for a little while. It works well, we have had a few users get it up ...... <less PacDisplay on Intel Compute Stick? Forum - Published: Does anybody have any experience to share whether PacDisplay will run on an Atom-based Intel Compute Stick? I have an existing project where the user would like a couple of tag values shown on a large...moreDoes anybody have any experience to share whether PacDisplay will run on an Atom-based Intel Compute Stick? I have an existing project where the user would like a couple of tag values shown on a large display. I am wondering if an Intel STK1AW32SC Compute Stick and flat panel TV would be the answer. Thanks.... <less A minor question Forum - Published: A minor question My client asked me. Why is it called “Groov”? What’s special about it?...A minor question My client asked me. Why is it called “Groov”? What’s special about it?... <less Look, Ma, no I/O! Fun things you can do with PAC + IP Forum - Published: Hi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and...moreHi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and connections to the real world go to Ben instead of me (hopefully that’s due to his extensive real-world experience rather than those rumors about my causing fires). What types of no-I/O things are they doing, you ask? There was this ftp example which took advantage of a sensor in a camera and the F...... <less Pac R1 to Automation Direct C More HMI through Modbus Forum - Published: I have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the...moreI have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the modbus integration kit. For testing purposes we are just using the supplied strategy from the modbus integration kit. Good news: Coils and Ints work fine. Bad news: When entering a float variable on the HMI it goes into the Int holding table over two consecutive values, not to the float holding t...... <less ICTD module used in real world applications Forum - Published: Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?...Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?... <less PAC-R2 communicating via Ethernet/IP, CC-LinkV2 or DeviceNet Forum - Published: Hello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence...moreHello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence rep and he told we could Use a network communication module and then send configuration settings from your controller (PAC-R2) It looks like I would need to add a Keyence NU Series module. It supports the following protocols: Ethernet/IP CC-LinkV2 DeviceNet EtherCat OK, so this all sounds grea...... <less Latching inputs on RIO Forum - Published: Would it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1...moreWould it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1 without having to poll at a high rate. Unfortunately I need more than two of these.... <less Opto22 to check Ping Status Forum - Published: Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?...Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?... <less Upcoming groov webinar: "Building Mobile Interfaces for Industrial Applications" Forum - Published: It’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov...moreIt’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov.” Missed this? You can always [B]watch the archive.[/B] Date: Tuesday, September 10, 2013 Time: 9:00 a.m. to 9:30 a.m. PDT Key points in the webinar: Find out which mobile devices are supported by [I]groov[/I] See the difference between desktop and handheld view Learn best practices for designing m...... <less Noob question about wireless distances Forum - Published: I’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems...moreI’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems PLC SCADA system). How does Opto’s wireless compare? Two applications I am looking at are: (1) a water utility with two treatment plants, two remote tanks, & eleven remote wells. Distances are one to five miles, with line of sight and (2) a wastewater system with one plant and 30 lift stations sca...... <less Using Port 502 for Modbus Clients on groov Devices Forum - Published: Both groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I...moreBoth groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I/O or scratchpad data out of any of the groov devices to a ModbusTCP master on your local network. TIP. If you need a PAC Control variable available via Modbus, just write the variable to a scratchpad location and use the groov Manager Modbus calculator to get the device ID and register address of t...... <less Infomations Snap-Pac Brain Forum - Published: Hello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from...moreHello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from groov epic to snap-pac brain. So, my questions are the following: Can the snap pac brain be programmed through Node-red? Can I set the time zone (region Etc and Locality UTC) in the snap pac brain? Can I open the LAN port for TCP/IP communication in the snap pac brain? Thanks Giammarco... <less Groov RIO nodered error Forum - Published: Hi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO...moreHi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO with Node-Red after this error then I must restart the RIO then the flow will start again. Thanks.... <less EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
Installing 'node-red-contrib-oracledb' fails Forum - Published: I tried to install the node-red-contrib-oracledb node so I could read/write to our Oracle DB. I have setup the oracledb node module (see install instructions here: https://github.com/oracle/node-oracledb...moreI tried to install the node-red-contrib-oracledb node so I could read/write to our Oracle DB. I have setup the oracledb node module (see install instructions here: https://github.com/oracle/node-oracledb/blob/master/INSTALL.md) using traditional node applications in the past and the issue is that it needs access to a couple of oracle provided libraries to complete the install. I assume this means I would need command line access to the groovBox to be able to make this install work… is command li...... <less Decode Sparkplug Encoded MQTT Messages with Node-RED Forum - Published: If you want a Sparkplug-compliant client to read in data two of the best options out there are Ignition Edge and MQTT.fx, but sometimes I need something that lies between these two applications — this...moreIf you want a Sparkplug-compliant client to read in data two of the best options out there are Ignition Edge and MQTT.fx, but sometimes I need something that lies between these two applications — this is where Node-RED comes in. Using Node-RED it’s possible to read in and decode Sparkplug messages right in your flow, then you can easily move that data into any other Node-RED endpoint, whether it’s groov View, a database, or even cloud analytic software. Using this method Node-RED does not becom...... <less Send an email from a controller Forum - Published: This got covered over in a post in the ‘Applications’ forum, but I felt it worth putting in here as well. While the scratchpad is the main way to send an email from a PAC Controller, its not the only way...moreThis got covered over in a post in the ‘Applications’ forum, but I felt it worth putting in here as well. While the scratchpad is the main way to send an email from a PAC Controller, its not the only way… There is another; Use a chart to talk to your email server. This is pretty powerful as we are all very used to working in charts and they are nice and easy to debug. Here is some code that we have been working with on and off for a little while. It works well, we have had a few users get it up ...... <less PacDisplay on Intel Compute Stick? Forum - Published: Does anybody have any experience to share whether PacDisplay will run on an Atom-based Intel Compute Stick? I have an existing project where the user would like a couple of tag values shown on a large...moreDoes anybody have any experience to share whether PacDisplay will run on an Atom-based Intel Compute Stick? I have an existing project where the user would like a couple of tag values shown on a large display. I am wondering if an Intel STK1AW32SC Compute Stick and flat panel TV would be the answer. Thanks.... <less A minor question Forum - Published: A minor question My client asked me. Why is it called “Groov”? What’s special about it?...A minor question My client asked me. Why is it called “Groov”? What’s special about it?... <less Look, Ma, no I/O! Fun things you can do with PAC + IP Forum - Published: Hi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and...moreHi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and connections to the real world go to Ben instead of me (hopefully that’s due to his extensive real-world experience rather than those rumors about my causing fires). What types of no-I/O things are they doing, you ask? There was this ftp example which took advantage of a sensor in a camera and the F...... <less Pac R1 to Automation Direct C More HMI through Modbus Forum - Published: I have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the...moreI have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the modbus integration kit. For testing purposes we are just using the supplied strategy from the modbus integration kit. Good news: Coils and Ints work fine. Bad news: When entering a float variable on the HMI it goes into the Int holding table over two consecutive values, not to the float holding t...... <less ICTD module used in real world applications Forum - Published: Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?...Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?... <less PAC-R2 communicating via Ethernet/IP, CC-LinkV2 or DeviceNet Forum - Published: Hello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence...moreHello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence rep and he told we could Use a network communication module and then send configuration settings from your controller (PAC-R2) It looks like I would need to add a Keyence NU Series module. It supports the following protocols: Ethernet/IP CC-LinkV2 DeviceNet EtherCat OK, so this all sounds grea...... <less Latching inputs on RIO Forum - Published: Would it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1...moreWould it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1 without having to poll at a high rate. Unfortunately I need more than two of these.... <less Opto22 to check Ping Status Forum - Published: Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?...Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?... <less Upcoming groov webinar: "Building Mobile Interfaces for Industrial Applications" Forum - Published: It’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov...moreIt’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov.” Missed this? You can always [B]watch the archive.[/B] Date: Tuesday, September 10, 2013 Time: 9:00 a.m. to 9:30 a.m. PDT Key points in the webinar: Find out which mobile devices are supported by [I]groov[/I] See the difference between desktop and handheld view Learn best practices for designing m...... <less Noob question about wireless distances Forum - Published: I’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems...moreI’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems PLC SCADA system). How does Opto’s wireless compare? Two applications I am looking at are: (1) a water utility with two treatment plants, two remote tanks, & eleven remote wells. Distances are one to five miles, with line of sight and (2) a wastewater system with one plant and 30 lift stations sca...... <less Using Port 502 for Modbus Clients on groov Devices Forum - Published: Both groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I...moreBoth groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I/O or scratchpad data out of any of the groov devices to a ModbusTCP master on your local network. TIP. If you need a PAC Control variable available via Modbus, just write the variable to a scratchpad location and use the groov Manager Modbus calculator to get the device ID and register address of t...... <less Infomations Snap-Pac Brain Forum - Published: Hello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from...moreHello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from groov epic to snap-pac brain. So, my questions are the following: Can the snap pac brain be programmed through Node-red? Can I set the time zone (region Etc and Locality UTC) in the snap pac brain? Can I open the LAN port for TCP/IP communication in the snap pac brain? Thanks Giammarco... <less Groov RIO nodered error Forum - Published: Hi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO...moreHi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO with Node-Red after this error then I must restart the RIO then the flow will start again. Thanks.... <less EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
Decode Sparkplug Encoded MQTT Messages with Node-RED Forum - Published: If you want a Sparkplug-compliant client to read in data two of the best options out there are Ignition Edge and MQTT.fx, but sometimes I need something that lies between these two applications — this...moreIf you want a Sparkplug-compliant client to read in data two of the best options out there are Ignition Edge and MQTT.fx, but sometimes I need something that lies between these two applications — this is where Node-RED comes in. Using Node-RED it’s possible to read in and decode Sparkplug messages right in your flow, then you can easily move that data into any other Node-RED endpoint, whether it’s groov View, a database, or even cloud analytic software. Using this method Node-RED does not becom...... <less Send an email from a controller Forum - Published: This got covered over in a post in the ‘Applications’ forum, but I felt it worth putting in here as well. While the scratchpad is the main way to send an email from a PAC Controller, its not the only way...moreThis got covered over in a post in the ‘Applications’ forum, but I felt it worth putting in here as well. While the scratchpad is the main way to send an email from a PAC Controller, its not the only way… There is another; Use a chart to talk to your email server. This is pretty powerful as we are all very used to working in charts and they are nice and easy to debug. Here is some code that we have been working with on and off for a little while. It works well, we have had a few users get it up ...... <less PacDisplay on Intel Compute Stick? Forum - Published: Does anybody have any experience to share whether PacDisplay will run on an Atom-based Intel Compute Stick? I have an existing project where the user would like a couple of tag values shown on a large...moreDoes anybody have any experience to share whether PacDisplay will run on an Atom-based Intel Compute Stick? I have an existing project where the user would like a couple of tag values shown on a large display. I am wondering if an Intel STK1AW32SC Compute Stick and flat panel TV would be the answer. Thanks.... <less A minor question Forum - Published: A minor question My client asked me. Why is it called “Groov”? What’s special about it?...A minor question My client asked me. Why is it called “Groov”? What’s special about it?... <less Look, Ma, no I/O! Fun things you can do with PAC + IP Forum - Published: Hi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and...moreHi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and connections to the real world go to Ben instead of me (hopefully that’s due to his extensive real-world experience rather than those rumors about my causing fires). What types of no-I/O things are they doing, you ask? There was this ftp example which took advantage of a sensor in a camera and the F...... <less Pac R1 to Automation Direct C More HMI through Modbus Forum - Published: I have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the...moreI have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the modbus integration kit. For testing purposes we are just using the supplied strategy from the modbus integration kit. Good news: Coils and Ints work fine. Bad news: When entering a float variable on the HMI it goes into the Int holding table over two consecutive values, not to the float holding t...... <less ICTD module used in real world applications Forum - Published: Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?...Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?... <less PAC-R2 communicating via Ethernet/IP, CC-LinkV2 or DeviceNet Forum - Published: Hello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence...moreHello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence rep and he told we could Use a network communication module and then send configuration settings from your controller (PAC-R2) It looks like I would need to add a Keyence NU Series module. It supports the following protocols: Ethernet/IP CC-LinkV2 DeviceNet EtherCat OK, so this all sounds grea...... <less Latching inputs on RIO Forum - Published: Would it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1...moreWould it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1 without having to poll at a high rate. Unfortunately I need more than two of these.... <less Opto22 to check Ping Status Forum - Published: Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?...Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?... <less Upcoming groov webinar: "Building Mobile Interfaces for Industrial Applications" Forum - Published: It’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov...moreIt’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov.” Missed this? You can always [B]watch the archive.[/B] Date: Tuesday, September 10, 2013 Time: 9:00 a.m. to 9:30 a.m. PDT Key points in the webinar: Find out which mobile devices are supported by [I]groov[/I] See the difference between desktop and handheld view Learn best practices for designing m...... <less Noob question about wireless distances Forum - Published: I’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems...moreI’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems PLC SCADA system). How does Opto’s wireless compare? Two applications I am looking at are: (1) a water utility with two treatment plants, two remote tanks, & eleven remote wells. Distances are one to five miles, with line of sight and (2) a wastewater system with one plant and 30 lift stations sca...... <less Using Port 502 for Modbus Clients on groov Devices Forum - Published: Both groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I...moreBoth groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I/O or scratchpad data out of any of the groov devices to a ModbusTCP master on your local network. TIP. If you need a PAC Control variable available via Modbus, just write the variable to a scratchpad location and use the groov Manager Modbus calculator to get the device ID and register address of t...... <less Infomations Snap-Pac Brain Forum - Published: Hello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from...moreHello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from groov epic to snap-pac brain. So, my questions are the following: Can the snap pac brain be programmed through Node-red? Can I set the time zone (region Etc and Locality UTC) in the snap pac brain? Can I open the LAN port for TCP/IP communication in the snap pac brain? Thanks Giammarco... <less Groov RIO nodered error Forum - Published: Hi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO...moreHi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO with Node-Red after this error then I must restart the RIO then the flow will start again. Thanks.... <less EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
Send an email from a controller Forum - Published: This got covered over in a post in the ‘Applications’ forum, but I felt it worth putting in here as well. While the scratchpad is the main way to send an email from a PAC Controller, its not the only way...moreThis got covered over in a post in the ‘Applications’ forum, but I felt it worth putting in here as well. While the scratchpad is the main way to send an email from a PAC Controller, its not the only way… There is another; Use a chart to talk to your email server. This is pretty powerful as we are all very used to working in charts and they are nice and easy to debug. Here is some code that we have been working with on and off for a little while. It works well, we have had a few users get it up ...... <less PacDisplay on Intel Compute Stick? Forum - Published: Does anybody have any experience to share whether PacDisplay will run on an Atom-based Intel Compute Stick? I have an existing project where the user would like a couple of tag values shown on a large...moreDoes anybody have any experience to share whether PacDisplay will run on an Atom-based Intel Compute Stick? I have an existing project where the user would like a couple of tag values shown on a large display. I am wondering if an Intel STK1AW32SC Compute Stick and flat panel TV would be the answer. Thanks.... <less A minor question Forum - Published: A minor question My client asked me. Why is it called “Groov”? What’s special about it?...A minor question My client asked me. Why is it called “Groov”? What’s special about it?... <less Look, Ma, no I/O! Fun things you can do with PAC + IP Forum - Published: Hi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and...moreHi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and connections to the real world go to Ben instead of me (hopefully that’s due to his extensive real-world experience rather than those rumors about my causing fires). What types of no-I/O things are they doing, you ask? There was this ftp example which took advantage of a sensor in a camera and the F...... <less Pac R1 to Automation Direct C More HMI through Modbus Forum - Published: I have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the...moreI have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the modbus integration kit. For testing purposes we are just using the supplied strategy from the modbus integration kit. Good news: Coils and Ints work fine. Bad news: When entering a float variable on the HMI it goes into the Int holding table over two consecutive values, not to the float holding t...... <less ICTD module used in real world applications Forum - Published: Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?...Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?... <less PAC-R2 communicating via Ethernet/IP, CC-LinkV2 or DeviceNet Forum - Published: Hello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence...moreHello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence rep and he told we could Use a network communication module and then send configuration settings from your controller (PAC-R2) It looks like I would need to add a Keyence NU Series module. It supports the following protocols: Ethernet/IP CC-LinkV2 DeviceNet EtherCat OK, so this all sounds grea...... <less Latching inputs on RIO Forum - Published: Would it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1...moreWould it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1 without having to poll at a high rate. Unfortunately I need more than two of these.... <less Opto22 to check Ping Status Forum - Published: Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?...Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?... <less Upcoming groov webinar: "Building Mobile Interfaces for Industrial Applications" Forum - Published: It’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov...moreIt’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov.” Missed this? You can always [B]watch the archive.[/B] Date: Tuesday, September 10, 2013 Time: 9:00 a.m. to 9:30 a.m. PDT Key points in the webinar: Find out which mobile devices are supported by [I]groov[/I] See the difference between desktop and handheld view Learn best practices for designing m...... <less Noob question about wireless distances Forum - Published: I’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems...moreI’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems PLC SCADA system). How does Opto’s wireless compare? Two applications I am looking at are: (1) a water utility with two treatment plants, two remote tanks, & eleven remote wells. Distances are one to five miles, with line of sight and (2) a wastewater system with one plant and 30 lift stations sca...... <less Using Port 502 for Modbus Clients on groov Devices Forum - Published: Both groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I...moreBoth groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I/O or scratchpad data out of any of the groov devices to a ModbusTCP master on your local network. TIP. If you need a PAC Control variable available via Modbus, just write the variable to a scratchpad location and use the groov Manager Modbus calculator to get the device ID and register address of t...... <less Infomations Snap-Pac Brain Forum - Published: Hello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from...moreHello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from groov epic to snap-pac brain. So, my questions are the following: Can the snap pac brain be programmed through Node-red? Can I set the time zone (region Etc and Locality UTC) in the snap pac brain? Can I open the LAN port for TCP/IP communication in the snap pac brain? Thanks Giammarco... <less Groov RIO nodered error Forum - Published: Hi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO...moreHi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO with Node-Red after this error then I must restart the RIO then the flow will start again. Thanks.... <less EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
PacDisplay on Intel Compute Stick? Forum - Published: Does anybody have any experience to share whether PacDisplay will run on an Atom-based Intel Compute Stick? I have an existing project where the user would like a couple of tag values shown on a large...moreDoes anybody have any experience to share whether PacDisplay will run on an Atom-based Intel Compute Stick? I have an existing project where the user would like a couple of tag values shown on a large display. I am wondering if an Intel STK1AW32SC Compute Stick and flat panel TV would be the answer. Thanks.... <less A minor question Forum - Published: A minor question My client asked me. Why is it called “Groov”? What’s special about it?...A minor question My client asked me. Why is it called “Groov”? What’s special about it?... <less Look, Ma, no I/O! Fun things you can do with PAC + IP Forum - Published: Hi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and...moreHi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and connections to the real world go to Ben instead of me (hopefully that’s due to his extensive real-world experience rather than those rumors about my causing fires). What types of no-I/O things are they doing, you ask? There was this ftp example which took advantage of a sensor in a camera and the F...... <less Pac R1 to Automation Direct C More HMI through Modbus Forum - Published: I have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the...moreI have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the modbus integration kit. For testing purposes we are just using the supplied strategy from the modbus integration kit. Good news: Coils and Ints work fine. Bad news: When entering a float variable on the HMI it goes into the Int holding table over two consecutive values, not to the float holding t...... <less ICTD module used in real world applications Forum - Published: Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?...Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?... <less PAC-R2 communicating via Ethernet/IP, CC-LinkV2 or DeviceNet Forum - Published: Hello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence...moreHello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence rep and he told we could Use a network communication module and then send configuration settings from your controller (PAC-R2) It looks like I would need to add a Keyence NU Series module. It supports the following protocols: Ethernet/IP CC-LinkV2 DeviceNet EtherCat OK, so this all sounds grea...... <less Latching inputs on RIO Forum - Published: Would it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1...moreWould it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1 without having to poll at a high rate. Unfortunately I need more than two of these.... <less Opto22 to check Ping Status Forum - Published: Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?...Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?... <less Upcoming groov webinar: "Building Mobile Interfaces for Industrial Applications" Forum - Published: It’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov...moreIt’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov.” Missed this? You can always [B]watch the archive.[/B] Date: Tuesday, September 10, 2013 Time: 9:00 a.m. to 9:30 a.m. PDT Key points in the webinar: Find out which mobile devices are supported by [I]groov[/I] See the difference between desktop and handheld view Learn best practices for designing m...... <less Noob question about wireless distances Forum - Published: I’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems...moreI’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems PLC SCADA system). How does Opto’s wireless compare? Two applications I am looking at are: (1) a water utility with two treatment plants, two remote tanks, & eleven remote wells. Distances are one to five miles, with line of sight and (2) a wastewater system with one plant and 30 lift stations sca...... <less Using Port 502 for Modbus Clients on groov Devices Forum - Published: Both groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I...moreBoth groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I/O or scratchpad data out of any of the groov devices to a ModbusTCP master on your local network. TIP. If you need a PAC Control variable available via Modbus, just write the variable to a scratchpad location and use the groov Manager Modbus calculator to get the device ID and register address of t...... <less Infomations Snap-Pac Brain Forum - Published: Hello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from...moreHello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from groov epic to snap-pac brain. So, my questions are the following: Can the snap pac brain be programmed through Node-red? Can I set the time zone (region Etc and Locality UTC) in the snap pac brain? Can I open the LAN port for TCP/IP communication in the snap pac brain? Thanks Giammarco... <less Groov RIO nodered error Forum - Published: Hi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO...moreHi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO with Node-Red after this error then I must restart the RIO then the flow will start again. Thanks.... <less EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
A minor question Forum - Published: A minor question My client asked me. Why is it called “Groov”? What’s special about it?...A minor question My client asked me. Why is it called “Groov”? What’s special about it?... <less Look, Ma, no I/O! Fun things you can do with PAC + IP Forum - Published: Hi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and...moreHi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and connections to the real world go to Ben instead of me (hopefully that’s due to his extensive real-world experience rather than those rumors about my causing fires). What types of no-I/O things are they doing, you ask? There was this ftp example which took advantage of a sensor in a camera and the F...... <less Pac R1 to Automation Direct C More HMI through Modbus Forum - Published: I have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the...moreI have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the modbus integration kit. For testing purposes we are just using the supplied strategy from the modbus integration kit. Good news: Coils and Ints work fine. Bad news: When entering a float variable on the HMI it goes into the Int holding table over two consecutive values, not to the float holding t...... <less ICTD module used in real world applications Forum - Published: Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?...Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?... <less PAC-R2 communicating via Ethernet/IP, CC-LinkV2 or DeviceNet Forum - Published: Hello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence...moreHello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence rep and he told we could Use a network communication module and then send configuration settings from your controller (PAC-R2) It looks like I would need to add a Keyence NU Series module. It supports the following protocols: Ethernet/IP CC-LinkV2 DeviceNet EtherCat OK, so this all sounds grea...... <less Latching inputs on RIO Forum - Published: Would it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1...moreWould it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1 without having to poll at a high rate. Unfortunately I need more than two of these.... <less Opto22 to check Ping Status Forum - Published: Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?...Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?... <less Upcoming groov webinar: "Building Mobile Interfaces for Industrial Applications" Forum - Published: It’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov...moreIt’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov.” Missed this? You can always [B]watch the archive.[/B] Date: Tuesday, September 10, 2013 Time: 9:00 a.m. to 9:30 a.m. PDT Key points in the webinar: Find out which mobile devices are supported by [I]groov[/I] See the difference between desktop and handheld view Learn best practices for designing m...... <less Noob question about wireless distances Forum - Published: I’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems...moreI’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems PLC SCADA system). How does Opto’s wireless compare? Two applications I am looking at are: (1) a water utility with two treatment plants, two remote tanks, & eleven remote wells. Distances are one to five miles, with line of sight and (2) a wastewater system with one plant and 30 lift stations sca...... <less Using Port 502 for Modbus Clients on groov Devices Forum - Published: Both groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I...moreBoth groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I/O or scratchpad data out of any of the groov devices to a ModbusTCP master on your local network. TIP. If you need a PAC Control variable available via Modbus, just write the variable to a scratchpad location and use the groov Manager Modbus calculator to get the device ID and register address of t...... <less Infomations Snap-Pac Brain Forum - Published: Hello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from...moreHello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from groov epic to snap-pac brain. So, my questions are the following: Can the snap pac brain be programmed through Node-red? Can I set the time zone (region Etc and Locality UTC) in the snap pac brain? Can I open the LAN port for TCP/IP communication in the snap pac brain? Thanks Giammarco... <less Groov RIO nodered error Forum - Published: Hi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO...moreHi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO with Node-Red after this error then I must restart the RIO then the flow will start again. Thanks.... <less EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
Look, Ma, no I/O! Fun things you can do with PAC + IP Forum - Published: Hi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and...moreHi groov Fans, I noticed a trend recently in requests I’ve gotten for code examples to use with a groov Box: a couple of them have had little or no I/O! Of course, often folks needing actual wires and connections to the real world go to Ben instead of me (hopefully that’s due to his extensive real-world experience rather than those rumors about my causing fires). What types of no-I/O things are they doing, you ask? There was this ftp example which took advantage of a sensor in a camera and the F...... <less Pac R1 to Automation Direct C More HMI through Modbus Forum - Published: I have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the...moreI have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the modbus integration kit. For testing purposes we are just using the supplied strategy from the modbus integration kit. Good news: Coils and Ints work fine. Bad news: When entering a float variable on the HMI it goes into the Int holding table over two consecutive values, not to the float holding t...... <less ICTD module used in real world applications Forum - Published: Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?...Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?... <less PAC-R2 communicating via Ethernet/IP, CC-LinkV2 or DeviceNet Forum - Published: Hello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence...moreHello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence rep and he told we could Use a network communication module and then send configuration settings from your controller (PAC-R2) It looks like I would need to add a Keyence NU Series module. It supports the following protocols: Ethernet/IP CC-LinkV2 DeviceNet EtherCat OK, so this all sounds grea...... <less Latching inputs on RIO Forum - Published: Would it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1...moreWould it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1 without having to poll at a high rate. Unfortunately I need more than two of these.... <less Opto22 to check Ping Status Forum - Published: Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?...Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?... <less Upcoming groov webinar: "Building Mobile Interfaces for Industrial Applications" Forum - Published: It’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov...moreIt’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov.” Missed this? You can always [B]watch the archive.[/B] Date: Tuesday, September 10, 2013 Time: 9:00 a.m. to 9:30 a.m. PDT Key points in the webinar: Find out which mobile devices are supported by [I]groov[/I] See the difference between desktop and handheld view Learn best practices for designing m...... <less Noob question about wireless distances Forum - Published: I’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems...moreI’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems PLC SCADA system). How does Opto’s wireless compare? Two applications I am looking at are: (1) a water utility with two treatment plants, two remote tanks, & eleven remote wells. Distances are one to five miles, with line of sight and (2) a wastewater system with one plant and 30 lift stations sca...... <less Using Port 502 for Modbus Clients on groov Devices Forum - Published: Both groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I...moreBoth groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I/O or scratchpad data out of any of the groov devices to a ModbusTCP master on your local network. TIP. If you need a PAC Control variable available via Modbus, just write the variable to a scratchpad location and use the groov Manager Modbus calculator to get the device ID and register address of t...... <less Infomations Snap-Pac Brain Forum - Published: Hello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from...moreHello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from groov epic to snap-pac brain. So, my questions are the following: Can the snap pac brain be programmed through Node-red? Can I set the time zone (region Etc and Locality UTC) in the snap pac brain? Can I open the LAN port for TCP/IP communication in the snap pac brain? Thanks Giammarco... <less Groov RIO nodered error Forum - Published: Hi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO...moreHi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO with Node-Red after this error then I must restart the RIO then the flow will start again. Thanks.... <less EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
Pac R1 to Automation Direct C More HMI through Modbus Forum - Published: I have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the...moreI have a snap-pac-r1w and am trying to connect it to an Automation Direct C-More HMI EA9-T15CL-R Via modbus. The HMI is the master and we have the slave subroutine running in the strategy from the modbus integration kit. For testing purposes we are just using the supplied strategy from the modbus integration kit. Good news: Coils and Ints work fine. Bad news: When entering a float variable on the HMI it goes into the Int holding table over two consecutive values, not to the float holding t...... <less ICTD module used in real world applications Forum - Published: Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?...Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?... <less PAC-R2 communicating via Ethernet/IP, CC-LinkV2 or DeviceNet Forum - Published: Hello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence...moreHello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence rep and he told we could Use a network communication module and then send configuration settings from your controller (PAC-R2) It looks like I would need to add a Keyence NU Series module. It supports the following protocols: Ethernet/IP CC-LinkV2 DeviceNet EtherCat OK, so this all sounds grea...... <less Latching inputs on RIO Forum - Published: Would it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1...moreWould it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1 without having to poll at a high rate. Unfortunately I need more than two of these.... <less Opto22 to check Ping Status Forum - Published: Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?...Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?... <less Upcoming groov webinar: "Building Mobile Interfaces for Industrial Applications" Forum - Published: It’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov...moreIt’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov.” Missed this? You can always [B]watch the archive.[/B] Date: Tuesday, September 10, 2013 Time: 9:00 a.m. to 9:30 a.m. PDT Key points in the webinar: Find out which mobile devices are supported by [I]groov[/I] See the difference between desktop and handheld view Learn best practices for designing m...... <less Noob question about wireless distances Forum - Published: I’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems...moreI’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems PLC SCADA system). How does Opto’s wireless compare? Two applications I am looking at are: (1) a water utility with two treatment plants, two remote tanks, & eleven remote wells. Distances are one to five miles, with line of sight and (2) a wastewater system with one plant and 30 lift stations sca...... <less Using Port 502 for Modbus Clients on groov Devices Forum - Published: Both groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I...moreBoth groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I/O or scratchpad data out of any of the groov devices to a ModbusTCP master on your local network. TIP. If you need a PAC Control variable available via Modbus, just write the variable to a scratchpad location and use the groov Manager Modbus calculator to get the device ID and register address of t...... <less Infomations Snap-Pac Brain Forum - Published: Hello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from...moreHello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from groov epic to snap-pac brain. So, my questions are the following: Can the snap pac brain be programmed through Node-red? Can I set the time zone (region Etc and Locality UTC) in the snap pac brain? Can I open the LAN port for TCP/IP communication in the snap pac brain? Thanks Giammarco... <less Groov RIO nodered error Forum - Published: Hi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO...moreHi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO with Node-Red after this error then I must restart the RIO then the flow will start again. Thanks.... <less EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
ICTD module used in real world applications Forum - Published: Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?...Hello: Does anybody know if there is an application (excluding the Opto22 Traing Kit) that uses ICTD modules and ICTD probes? There are advantages/disadvantages compared with RTDs or TCs ?... <less PAC-R2 communicating via Ethernet/IP, CC-LinkV2 or DeviceNet Forum - Published: Hello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence...moreHello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence rep and he told we could Use a network communication module and then send configuration settings from your controller (PAC-R2) It looks like I would need to add a Keyence NU Series module. It supports the following protocols: Ethernet/IP CC-LinkV2 DeviceNet EtherCat OK, so this all sounds grea...... <less Latching inputs on RIO Forum - Published: Would it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1...moreWould it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1 without having to poll at a high rate. Unfortunately I need more than two of these.... <less Opto22 to check Ping Status Forum - Published: Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?...Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?... <less Upcoming groov webinar: "Building Mobile Interfaces for Industrial Applications" Forum - Published: It’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov...moreIt’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov.” Missed this? You can always [B]watch the archive.[/B] Date: Tuesday, September 10, 2013 Time: 9:00 a.m. to 9:30 a.m. PDT Key points in the webinar: Find out which mobile devices are supported by [I]groov[/I] See the difference between desktop and handheld view Learn best practices for designing m...... <less Noob question about wireless distances Forum - Published: I’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems...moreI’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems PLC SCADA system). How does Opto’s wireless compare? Two applications I am looking at are: (1) a water utility with two treatment plants, two remote tanks, & eleven remote wells. Distances are one to five miles, with line of sight and (2) a wastewater system with one plant and 30 lift stations sca...... <less Using Port 502 for Modbus Clients on groov Devices Forum - Published: Both groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I...moreBoth groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I/O or scratchpad data out of any of the groov devices to a ModbusTCP master on your local network. TIP. If you need a PAC Control variable available via Modbus, just write the variable to a scratchpad location and use the groov Manager Modbus calculator to get the device ID and register address of t...... <less Infomations Snap-Pac Brain Forum - Published: Hello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from...moreHello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from groov epic to snap-pac brain. So, my questions are the following: Can the snap pac brain be programmed through Node-red? Can I set the time zone (region Etc and Locality UTC) in the snap pac brain? Can I open the LAN port for TCP/IP communication in the snap pac brain? Thanks Giammarco... <less Groov RIO nodered error Forum - Published: Hi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO...moreHi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO with Node-Red after this error then I must restart the RIO then the flow will start again. Thanks.... <less EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
PAC-R2 communicating via Ethernet/IP, CC-LinkV2 or DeviceNet Forum - Published: Hello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence...moreHello, We have a machine with a Keyence LR-W70 full spectrum sensor. Configuring this sensor with it’s onboard controls for each production job is problematic and time consuming. I talked to my Keyence rep and he told we could Use a network communication module and then send configuration settings from your controller (PAC-R2) It looks like I would need to add a Keyence NU Series module. It supports the following protocols: Ethernet/IP CC-LinkV2 DeviceNet EtherCat OK, so this all sounds grea...... <less Latching inputs on RIO Forum - Published: Would it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1...moreWould it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1 without having to poll at a high rate. Unfortunately I need more than two of these.... <less Opto22 to check Ping Status Forum - Published: Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?...Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?... <less Upcoming groov webinar: "Building Mobile Interfaces for Industrial Applications" Forum - Published: It’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov...moreIt’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov.” Missed this? You can always [B]watch the archive.[/B] Date: Tuesday, September 10, 2013 Time: 9:00 a.m. to 9:30 a.m. PDT Key points in the webinar: Find out which mobile devices are supported by [I]groov[/I] See the difference between desktop and handheld view Learn best practices for designing m...... <less Noob question about wireless distances Forum - Published: I’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems...moreI’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems PLC SCADA system). How does Opto’s wireless compare? Two applications I am looking at are: (1) a water utility with two treatment plants, two remote tanks, & eleven remote wells. Distances are one to five miles, with line of sight and (2) a wastewater system with one plant and 30 lift stations sca...... <less Using Port 502 for Modbus Clients on groov Devices Forum - Published: Both groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I...moreBoth groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I/O or scratchpad data out of any of the groov devices to a ModbusTCP master on your local network. TIP. If you need a PAC Control variable available via Modbus, just write the variable to a scratchpad location and use the groov Manager Modbus calculator to get the device ID and register address of t...... <less Infomations Snap-Pac Brain Forum - Published: Hello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from...moreHello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from groov epic to snap-pac brain. So, my questions are the following: Can the snap pac brain be programmed through Node-red? Can I set the time zone (region Etc and Locality UTC) in the snap pac brain? Can I open the LAN port for TCP/IP communication in the snap pac brain? Thanks Giammarco... <less Groov RIO nodered error Forum - Published: Hi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO...moreHi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO with Node-Red after this error then I must restart the RIO then the flow will start again. Thanks.... <less EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
Latching inputs on RIO Forum - Published: Would it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1...moreWould it be possible to add the latching feature to the other channels on a RIO in a future firmware? I don’t need high speed, but would like to be able to detect a button press on a RIO from a PR1 without having to poll at a high rate. Unfortunately I need more than two of these.... <less Opto22 to check Ping Status Forum - Published: Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?...Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?... <less Upcoming groov webinar: "Building Mobile Interfaces for Industrial Applications" Forum - Published: It’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov...moreIt’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov.” Missed this? You can always [B]watch the archive.[/B] Date: Tuesday, September 10, 2013 Time: 9:00 a.m. to 9:30 a.m. PDT Key points in the webinar: Find out which mobile devices are supported by [I]groov[/I] See the difference between desktop and handheld view Learn best practices for designing m...... <less Noob question about wireless distances Forum - Published: I’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems...moreI’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems PLC SCADA system). How does Opto’s wireless compare? Two applications I am looking at are: (1) a water utility with two treatment plants, two remote tanks, & eleven remote wells. Distances are one to five miles, with line of sight and (2) a wastewater system with one plant and 30 lift stations sca...... <less Using Port 502 for Modbus Clients on groov Devices Forum - Published: Both groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I...moreBoth groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I/O or scratchpad data out of any of the groov devices to a ModbusTCP master on your local network. TIP. If you need a PAC Control variable available via Modbus, just write the variable to a scratchpad location and use the groov Manager Modbus calculator to get the device ID and register address of t...... <less Infomations Snap-Pac Brain Forum - Published: Hello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from...moreHello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from groov epic to snap-pac brain. So, my questions are the following: Can the snap pac brain be programmed through Node-red? Can I set the time zone (region Etc and Locality UTC) in the snap pac brain? Can I open the LAN port for TCP/IP communication in the snap pac brain? Thanks Giammarco... <less Groov RIO nodered error Forum - Published: Hi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO...moreHi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO with Node-Red after this error then I must restart the RIO then the flow will start again. Thanks.... <less EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
Opto22 to check Ping Status Forum - Published: Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?...Is there any possible applications/script for Opto22 to check if all devices in network can be reach? Pingable?... <less Upcoming groov webinar: "Building Mobile Interfaces for Industrial Applications" Forum - Published: It’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov...moreIt’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov.” Missed this? You can always [B]watch the archive.[/B] Date: Tuesday, September 10, 2013 Time: 9:00 a.m. to 9:30 a.m. PDT Key points in the webinar: Find out which mobile devices are supported by [I]groov[/I] See the difference between desktop and handheld view Learn best practices for designing m...... <less Noob question about wireless distances Forum - Published: I’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems...moreI’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems PLC SCADA system). How does Opto’s wireless compare? Two applications I am looking at are: (1) a water utility with two treatment plants, two remote tanks, & eleven remote wells. Distances are one to five miles, with line of sight and (2) a wastewater system with one plant and 30 lift stations sca...... <less Using Port 502 for Modbus Clients on groov Devices Forum - Published: Both groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I...moreBoth groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I/O or scratchpad data out of any of the groov devices to a ModbusTCP master on your local network. TIP. If you need a PAC Control variable available via Modbus, just write the variable to a scratchpad location and use the groov Manager Modbus calculator to get the device ID and register address of t...... <less Infomations Snap-Pac Brain Forum - Published: Hello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from...moreHello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from groov epic to snap-pac brain. So, my questions are the following: Can the snap pac brain be programmed through Node-red? Can I set the time zone (region Etc and Locality UTC) in the snap pac brain? Can I open the LAN port for TCP/IP communication in the snap pac brain? Thanks Giammarco... <less Groov RIO nodered error Forum - Published: Hi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO...moreHi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO with Node-Red after this error then I must restart the RIO then the flow will start again. Thanks.... <less EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
Upcoming groov webinar: "Building Mobile Interfaces for Industrial Applications" Forum - Published: It’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov...moreIt’s not too late to sign up for [B]tomorrow’s [I]groov[/I] webinar[/B] on building mobile interfaces for industrial applications. This is a follow-up to the earlier webinar “Introduction to groov.” Missed this? You can always [B]watch the archive.[/B] Date: Tuesday, September 10, 2013 Time: 9:00 a.m. to 9:30 a.m. PDT Key points in the webinar: Find out which mobile devices are supported by [I]groov[/I] See the difference between desktop and handheld view Learn best practices for designing m...... <less Noob question about wireless distances Forum - Published: I’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems...moreI’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems PLC SCADA system). How does Opto’s wireless compare? Two applications I am looking at are: (1) a water utility with two treatment plants, two remote tanks, & eleven remote wells. Distances are one to five miles, with line of sight and (2) a wastewater system with one plant and 30 lift stations sca...... <less Using Port 502 for Modbus Clients on groov Devices Forum - Published: Both groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I...moreBoth groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I/O or scratchpad data out of any of the groov devices to a ModbusTCP master on your local network. TIP. If you need a PAC Control variable available via Modbus, just write the variable to a scratchpad location and use the groov Manager Modbus calculator to get the device ID and register address of t...... <less Infomations Snap-Pac Brain Forum - Published: Hello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from...moreHello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from groov epic to snap-pac brain. So, my questions are the following: Can the snap pac brain be programmed through Node-red? Can I set the time zone (region Etc and Locality UTC) in the snap pac brain? Can I open the LAN port for TCP/IP communication in the snap pac brain? Thanks Giammarco... <less Groov RIO nodered error Forum - Published: Hi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO...moreHi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO with Node-Red after this error then I must restart the RIO then the flow will start again. Thanks.... <less EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
Noob question about wireless distances Forum - Published: I’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems...moreI’ve looked over the site and haven’t been able to find any information on the distance limitations on the wireless units. I’m familiar with spread-spectrum radios (use them with a Control Microsystems PLC SCADA system). How does Opto’s wireless compare? Two applications I am looking at are: (1) a water utility with two treatment plants, two remote tanks, & eleven remote wells. Distances are one to five miles, with line of sight and (2) a wastewater system with one plant and 30 lift stations sca...... <less Using Port 502 for Modbus Clients on groov Devices Forum - Published: Both groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I...moreBoth groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I/O or scratchpad data out of any of the groov devices to a ModbusTCP master on your local network. TIP. If you need a PAC Control variable available via Modbus, just write the variable to a scratchpad location and use the groov Manager Modbus calculator to get the device ID and register address of t...... <less Infomations Snap-Pac Brain Forum - Published: Hello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from...moreHello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from groov epic to snap-pac brain. So, my questions are the following: Can the snap pac brain be programmed through Node-red? Can I set the time zone (region Etc and Locality UTC) in the snap pac brain? Can I open the LAN port for TCP/IP communication in the snap pac brain? Thanks Giammarco... <less Groov RIO nodered error Forum - Published: Hi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO...moreHi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO with Node-Red after this error then I must restart the RIO then the flow will start again. Thanks.... <less EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
Using Port 502 for Modbus Clients on groov Devices Forum - Published: Both groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I...moreBoth groov EPIC and groov RIO (the whole family) are ModbusTCP slaves out of the box. They listen on port 502 and send the requested data back out that port. This is very powerful if you are needing I/O or scratchpad data out of any of the groov devices to a ModbusTCP master on your local network. TIP. If you need a PAC Control variable available via Modbus, just write the variable to a scratchpad location and use the groov Manager Modbus calculator to get the device ID and register address of t...... <less Infomations Snap-Pac Brain Forum - Published: Hello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from...moreHello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from groov epic to snap-pac brain. So, my questions are the following: Can the snap pac brain be programmed through Node-red? Can I set the time zone (region Etc and Locality UTC) in the snap pac brain? Can I open the LAN port for TCP/IP communication in the snap pac brain? Thanks Giammarco... <less Groov RIO nodered error Forum - Published: Hi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO...moreHi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO with Node-Red after this error then I must restart the RIO then the flow will start again. Thanks.... <less EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
Infomations Snap-Pac Brain Forum - Published: Hello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from...moreHello everyone, I’m considering replacing the groov epic with a snap-pac brain for some applications that require less space, but I have to transfer the Node-red code and the Pac-Control strategy from groov epic to snap-pac brain. So, my questions are the following: Can the snap pac brain be programmed through Node-red? Can I set the time zone (region Etc and Locality UTC) in the snap pac brain? Can I open the LAN port for TCP/IP communication in the snap pac brain? Thanks Giammarco... <less Groov RIO nodered error Forum - Published: Hi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO...moreHi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO with Node-Red after this error then I must restart the RIO then the flow will start again. Thanks.... <less EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
Groov RIO nodered error Forum - Published: Hi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO...moreHi, We’ve got error message below and how to fixes? There are a couple of reasons, API key, server and the like. Screenshot 2022-12-27 0505291057×387 17.8 KB We created monitor and control on RIO with Node-Red after this error then I must restart the RIO then the flow will start again. Thanks.... <less EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
EPIC Load Cell Input Forum - Published: Is there a timeline on when or if load cell input modules will become available for the EPIC platform?...Is there a timeline on when or if load cell input modules will become available for the EPIC platform?... <less Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
Groov writing to a database Forum - Published: How would you go about having Groov write back to a database such as MS Access?...How would you go about having Groov write back to a database such as MS Access?... <less Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
Groov View run 3rd party exe file Forum - Published: Greetings, Is there possible for groov view to run a 3rd party exe? Thanks...Greetings, Is there possible for groov view to run a 3rd party exe? Thanks... <less Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items
Video Gadget doesn't work Forum - Published: I am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming...moreI am trying to use the video gadget on my groov view (win server). I am connecting to HIKvision camera. Manufacturer gives the following info to connect: http://user:password@/ISAPI/Streaming/channels/102/httpPreview When I paste this into the URL space of my browser (Edge) it works fine, displays current snapshot. However, when I try to use this URL within video gadget I get nothing. Test does nothing, saving and displaying shows nothing. Does it maybe have to do with the embedded username a...... <less Page 1 of 6Next » Show 25 Items Show All Items Show 10 Items Show 25 Items Show 50 Items Show 100 Items