This technical note shows you how to set offset and gain for Opto 22 analog input modules. It includes instructions for the following Opto 22 hardware:

• groov RIO Universal I/O units, such as the GRV-R7-MM2001-10, and modules attached to groov EPIC processors, such as the GRV-EPIC-PR2
• Modules attached to SNAP PAC controllers and brains, such as the SNAP-PAC-R1, and Ethernet-based I/O units, such as SNAP-B3000-ENET
• Analog modules for mistic brains and bricks, such as the B3000 and B3000-HA 
• Analog cards (such as the G4AIVA) for mistic high-density analog bricks (such as the G4HDAR)

Download