OAC24
Hover over image to zoom in

OAC24

$25.75 (USA and Canada only)

Availability: In stock
G1 AC Digital Output, 12-140 VAC, 24 VDC Logic

Production Specification

G1 I/O family

The OAC24 output module is used for controlling or switching AC loads of 12-140 VAC. Each module provides up to 4000 volts (transient) of optical isolation between the field devices and the control logic. This module is equivalent to a single pole, single throw, normally open contact (FORM A, SPST-NO, Make). All AC output modules feature zero voltage turn-on and zero current turn-off.

Typical uses and applications for AC output modules include switching the following loads:

  • Relays
  • Solenoids
  • Motor starters
  • Heaters
  • Lamps or indicators

OAC24 modules are not for use with Opto 22 brains.

One Cycle Surge

80 amps peak

Peak Repetitive Voltage

500 Volts

Operating Ambient Temperature

-30 to 70 °C

Isolation, Input-to-Output (Transient)

4,000 Vrms

Minimum Load Current

20 milliamps

Operating Frequency

25–65 Hz

Turn-on Time

1/2 cycle maximum-zero voltage

Turn-off Time

1/2 cycle maximum-zero current

DV/DT - Off-State

200 volts/microseconds

DV/DT - Commutating

Snubbed for rated 0.5 power factor load

Output Voltage Drop Maximum Peak

1.6 volts

Off-State Leakage
@ Nominal Voltage - 60 Hz

 

5 milliamps rms
2.5 milliamps rms for OAC5A OAC15A,
and OAC24A @120 VAC

Module Specifications

 

Units

OAC5

OAC5A

OAC5H

OAC5A5
(NC)

OAC153

OAC15A3

OAC243

OAC24A3

OAC24H3

Line Voltage - Nominal

VAC

120

240

240

120/240

120

240

120

240

240

Operating Voltage Range

VAC

12–140

24–280

24–280

24–280

12–140

24–280

12–140

24–280

24–280

Current Rating
  @ 45 °C Ambient
  @ 70 °C Ambient

 

amps
amps

 

3
2

 

3
2

 

4
2

 

3
2

 

3
2

 

3
2

 

3
2

 

3
2

 

4
2

UL Motor Load Rating

amps

1.5

1.5

-- 1

1.5

1.5

1.5

1.5

1.5

-- 1

Logic Voltage - Nominal

VDC

5

5

5

5

15

15

24

24

24

Logic Voltage Range (Vcc)2

VDC

2.5–8

2.5–8

2.5–8

2.5–8

9–16

9–16

18–32

18–32

18–32

Logic Pickup Voltage1

VDC

2.5

2.5

2.5

2.5

9

9

18

18

18

Logic Dropout Voltage

VDC

1

1

1

1

1

1

1

1

1

Logic Input Current-@ Normal Logic
Voltage (Iout in schematic diagram)

mA

12

12

12

12

15

15

18

18

18

Control Resistance
(Rc in schematic diagram)

Ohms

220

220

220

220

1K

1K

2.2K

2.2K

2.2K

Agency Approvals   UL, CE,
CSA,
RoHS,
UKCA
UL, CE,
CSA,
RoHS,
UKCA
CE,
CSA,
RoHS,
UKCA
UL, CE,
CSA,
RoHS,
UKCA
UL, CE,
CSA,
RoHS,
UKCA
UL, CE,
CSA,
RoHS,
UKCA
UL, CE,
CSA,
RoHS,
UKCA
UL, CE,
CSA,
RoHS,
UKCA
CE,
CSA,
RoHS,
UKCA

1 Not UL approved
2 Module only
3 Not for use with Opto 22 brains

Standard Digital AC Output Modules Data Sheet

AC output modules are used for controlling or switching AC loads.

UKCA Declaration of Conformity (EMC, LVD, RoHS)

This document is the Manufacturer's Declaration of Conformity for the products listed herein, in accordance with the rules, regulations and standards of the United Kingdom. The models cited have been tested to the essential requirements listed in the Standards section, and fully comply with the legislation as listed in UK Legislation section.

Declaration of Conformity (EMC, LVD, RoHS)

This document is the Manufacturer's Declaration of Conformity for the products listed herein, in accordance with European, international, and/or national standards and regulations.

Opto 22 RoHS 3 Statement of Compliance - Restriction of Hazardous Substances

This document is a statement of compliance with the EU Directive 2015/863/EU, Restriction of Hazardous Substances (RoHS 3). This document lists Opto 22 products that comply with the substance restrictions of the RoHS 3 directive.

CSA Approval Document

This document lists all Opto 22 part numbers that have the Canadian Standards Association (CSA) approval.

UL Approval Document

This document lists all Opto 22 part numbers that have the Underwriters Laboratory (UL) approval.

CE Declaration: EMC

This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with the mentioned European, international and/or national standards and regulations.

CE Declaration: Low Voltage

This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with the mentioned European, international and/or national standards and regulations.

No downloads are available for this product.
No videos or demos are available for this product.