G4AD26
Hover over image to zoom in

G4AD26

Availability: Obsolete
OBSOLETE G4 DV/DT Analog Input Module

Production Specification

*** NOTE: This part is obsolete and no longer available when current stock is depleted. ***​

G4 I/O family

The G4AD26 velocity input module provides a single channel of transformer and optically isolated analog-to-digital conversion. Air/hydraulic cylinders and forward, reversing, or rotating machinery with potentiometer-based transducers are typical inputs for the G4AD26 module. It can measure piston velocity in both forward and reverse directions, or derive acceleration for use in a PID control system.

This module also includes complete electrical channel-to-channel isolation, eliminating troublesome ground loop problems.

Power Requirements

24 VDC (± .5 V) @ 40 mA

Logic Supply

5.5 V max. @ 15 mA

Ambient Temperature
  Operating
  Storage

 

0 to 70 °C
-25 to 85 °C

Nominal Input Range

-5 to +5 Volts/second

Over/Under Range

-5.6 to +21.37 V/s

Maximum Differential Voltage

±22 Volts

Resolution mV/S

2.4 mV/s from -5 to +5 V/s
4.8 mV/s from 5 to 15 V/s
9.8 mV/s from 15 to 21.37 V/s

Output Accuracy

±5% of Span (V/s)

Input Response Time

63% (3.15 V/s) 15 ms
90% (4.50 V/s) 45 ms

DC Common Mode Rejection

> -120 dB

AC Common Mode Rejection

> -120 dB @ 60 Hz

DC Reversal Error

± 0.2% of Span

Input Resistance
  Differential
  Common Mode

 

750 kOhms
>1000 mOhms

Agency Approvals CE; UKCA

 

G4 Analog Rate Input Module Data Sheet

The G4AD26 module provides a single channel of transformer and optically-isolated analog-to-digital conversion.

UKCA Declaration of Conformity (EMC, LVD, RoHS)

This document is the Manufacturer's Declaration of Conformity for the products listed herein, in accordance with the rules, regulations and standards of the United Kingdom. The models cited have been tested to the essential requirements listed in the Standards section, and fully comply with the legislation as listed in UK Legislation section.

Declaration of Conformity (EMC, LVD, RoHS)

This document is the Manufacturer's Declaration of Conformity for the products listed herein, in accordance with European, international, and/or national standards and regulations.

Opto 22 RoHS 3 Statement of Compliance - Restriction of Hazardous Substances

This document is a statement of compliance with the EU Directive 2015/863/EU, Restriction of Hazardous Substances (RoHS 3). This document lists Opto 22 products that comply with the substance restrictions of the RoHS 3 directive.

CE Declaration: EMC

This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with the mentioned European, international and/or national standards and regulations.

CE Declaration: Low Voltage

This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with the mentioned European, international and/or national standards and regulations.

No downloads are available for this product.
No videos or demos are available for this product.