SNAP-IDC-16
Hover over image to zoom in

SNAP-IDC-16

$278.00 (USA and Canada only)

Availability: Call for Availability
SNAP Isolated 16-pt Digital (Discrete) Input Module, 10-32 VDC

Production Specification

The SNAP-IDC-16 provides 16 isolated channels of 10-32 VDC input and features automatic counting and latching. It can be used to sense on/off status for 10–32 VDC inputs from sources such as proximity switches, limit switches, push buttons, and pilot switches.

Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for an Allen-Bradley Logix PLC system, such as ControlLogix, MicroLogix, or CompactLogix.

For field wiring, use the SNAP-HD-ACF6 wiring harness assembly with flying leads.

If you don't need channel-to-channel isolation, see the 32-channel SNAP-IDC-32 module.

This module cannot be used with legacy brains.

Reference Charts: Build your system in the SNAP I/O Configurator.

 

SNAP-IDC-16

SNAP-IDC-HT-16

SNAP-IAC-16

SNAP-IAC-A-16

SNAP-IAC-K-16

Input Range

10–32 VDC/VAC

15–28 VDC/VAC

90–140 VAC/VDC

180–280 VAC/VDC

70–130 VAC/VDC

Nominal Voltage Range

24 VDC

24 VDC

120 VAC

240 VAC

100 VAC

Input Resistance

44 K ohms

4 K ohms

300 K ohms

940 K ohms

220 K ohms

Logic Voltage and
Current

5 VDC ± 0.1 @ 150 mA

5 VDC ± 0.1 @ 150 mA

5 VDC ± 0.1 @ 150 mA

5 VDC ± 0.1 @ 150 mA

5 VDC ± 0.1 @ 150 mA

Input Arrangement

16 isolated input channels

16 isolated input channels

Channel-to-Channel Isolation

250 V steady-state,
1500 V transient

250 V steady-state,
1500 V transient

Maximum Operating Common Mode Voltage

250 V

250 V

250 V

250 V

250 V

Isolation: Field to Logic

1500 V

1500 V

1500 V

1500 V

1500 V

Maximum Number of HDD Modules on One Mounting Rack

16

16

16

16

16

Indicators

None; use optional OptoTerminal-G20 diagnostic display.

None; use optional OptoTerminal-G20 diagnostic display.

ON Voltage

10 VDC @ 0.230 mA

15 VDC @ 3.50 mA

90 VAC/VDC @ 0.3 mA

180 VAC/VDC @ 0.191 mA

70 VAC/VDC @ 0.3 mA

OFF Voltage

3 VDC @ 0.05 mA

9 VDC @ 2.0 mA

40 VAC/VDC @ 0.135 mA

40 VAC/VDC @ 0.043 mA

30 VAC/VDC @ 0.135 mA

Torque, hold-down screws

Not to exceed 1 in-lb (0.11 N-m)

Not to exceed 1 in-lb (0.11 N-m)

Not to exceed 1 in-lb (0.11 N-m)

Not to exceed 1 in-lb (0.11 N-m)

Not to exceed 1 in-lb (0.11 N-m)

Torque, connector screws

5.22 in-lb (0.59 N-m)

5.22 in-lb (0.59 N-m)

5.22 in-lb (0.59 N-m)

5.22 in-lb (0.59 N-m)

5.22 in-lb (0.59 N-m)

Polling time from I/O processor to module1

2–30 ms typical2

2–30 ms typical2

2–30 ms typical2

2–30 ms typical2

2–30 ms typical2

Input Turn-On/Off Time

15 ms turn-on time
20 ms turn-off time

20 ms turn-on time
25 ms turn-off time

15 ms turn-on time
20 ms turn-off time

15 ms turn-on time
20 ms turn-off time

15 ms turn-on time
20 ms turn-off time

Counting Frequency
(DC input)

0–25 Hz @ 50% duty cycle

0–15 Hz @ 50% duty cycle

0–25 Hz @ 50% duty cycle

0–25 Hz @ 50% duty cycle

0–25 Hz @ 50% duty cycle

Operating Temperature

-20 to 70 °C

-20 to 70 °C

-20 to 70 °C

-20 to 70 °C

-20 to 70 °C

Storage Temperature

-40 to 85 °C

-40 to 85 °C

-40 to 85 °C

-40 to 85 °C

-40 to 85 °C

Agency Approvals

UL, CE, RoHS, DFARS; UKCA

CE, RoHS, DFARS

UL, CE, RoHS, DFARS; UKCA

UL, CE, RoHS, DFARS; UKCA

CE, RoHS, DFARS

Warranty

Lifetime

Lifetime

Lifetime

Lifetime

Lifetime

1 Affects turn-on and turn-off determination
2 Time varies based on the SNAP PAC I/O processor (brain or on-the-rack controller), processor configuration, and Ethernet host communication activity.

Modules, Cables, and Breakout Boards Compatibility Charts

This document shows which SNAP I/O modules, breakout boards, and cables can be used together.

Comparison Chart: SNAP 4-Channel and High-Density Digital Modules

This document compares 4-channel and high-density SNAP digital I/O modules.

SNAP PAC System Product Guide

This document lists and describes all current Opto 22 SNAP PAC System part numbers, including PAC Project software, SNAP PAC controllers, and SNAP I/O modules of all kinds. SNAP PAC mounting racks and SNAP power supplies are also listed.

SNAP High-Density Digital Modules Data Sheet

SNAP I/O high-density digital modules from Opto 22 provide 16 or 32 digital input or output points in one compact SNAP module. These modules are ideal for OEMs and others who have high point-count applications, or for anyone requiring more than 64 digital points on a single SNAP PAC rack. The high-density configuration reduces per-point costs of digital I/O systems by providing up to eight times as many I/O points in the same space.

SNAP high-density digital modules are part of the SNAP PAC System. They can also be used as part of intelligent remote I/O with an Allen-Bradley Logix PLC system. HDD modules require a SNAP PAC R-series controller or a SNAP PAC brain for I/O processing.

This data sheet covers the following modules:

The data sheet also covers the following accessories used with SNAP HDD modules:

SNAP High-Density Digital Module User's Guide

This guide covers how to install and test SNAP 16-channel and 32-channel digital modules, part of the SNAP PAC System. These modules provide 16 or 32 points of digital input or digital output in the same space as a 4-channel digital module. They are ideal for OEMs and for anyone who needs up to 512 digital points on a single mounting rack. SNAP high-density digital modules include the following part numbers:

  • SNAP-IAC-16
  • SNAP-IAC-A-16
  • SNAP-IAC-K-16
  • SNAP-IDC-16
  • SNAP-IDC-32
  • SNAP-IDC-32D
  • SNAP-IDC-32DN
  • SNAP-IDC-32-FM [OBSOLETE]
  • SNAP-IDC-32N
  • SNAP-ODC-32-SNK
  • SNAP-ODC-32-SNK-FM  [OBSOLETE]
  • SNAP-ODC-32-SRC
  • SNAP-ODC-32-SRC-FM  [OBSOLETE]

UKCA Declaration of Conformity (EMC, LVD, RoHS)

This document is the Manufacturer's Declaration of Conformity for the products listed herein, in accordance with the rules, regulations and standards of the United Kingdom. The models cited have been tested to the essential requirements listed in the Standards section, and fully comply with the legislation as listed in UK Legislation section.

Declaration of Conformity (EMC, LVD, RoHS)

This document is the Manufacturer's Declaration of Conformity for the products listed herein, in accordance with European, international, and/or national standards and regulations.

Opto 22 RoHS 3 Statement of Compliance - Restriction of Hazardous Substances

This document is a statement of compliance with the EU Directive 2015/863/EU, Restriction of Hazardous Substances (RoHS 3). This document lists Opto 22 products that comply with the substance restrictions of the RoHS 3 directive.

UL Approval Document

This document lists all Opto 22 part numbers that have the Underwriters Laboratory (UL) approval.

CE Declaration: EMC

This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with the mentioned European, international and/or national standards and regulations.

CE Declaration: Low Voltage

This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with the mentioned European, international and/or national standards and regulations.

CAD 3D Drawing: SNAP-IAC-16/IAC-A-16/IDC-16

This CAD file includes one 3D drawing that can be used for these 16-channel SNAP digital input modules: the SNAP-IAC-16, the SNAP-IAC-A-16, and the SNAP-IDC-16. Each module provides channel-to-channel isolation.

Video: SNAP PAC System Overview

This overview describes the four integrated components of the SNAP PAC system: software, controllers, brains and I/O. This hardware and software system is designed for industrial control, remote monitoring and data acquisition.

Video: Securing SNAP Module

A quick overview on securing a SNAP Module to a SNAP rack.

Video: Removing a SNAP Module

A quick overview on removing a SNAP module.

Accuracy vs Resolution

What's the difference between accuracy and resolution in analog I/O specifications? Try your own specs in the calculator.