SNAP-B6
Hover over image to zoom in

SNAP-B6

Availability: Obsolete
OBSOLETE SNAP 32-channel Pamux Protocol Analog Brain Board

Production Specification

The SNAP-B6 is obsolete and no longer available. There is no direct or similar replacement.

Our SNAP-PAC-R series family of controllers are often used as part of a redesign, but both the hardware and software interfaces for these are completely different from those for the SNAP-B6.

Please contact our Opto 22 Pre-Sales engineers with details about the specific application so they can help recommend parts for a redesign.

SNAP 32-channel Pamux Protocol Analog Brain Board

Power Requirements

5.0 - 5.2 VDC @ 1.0A max
(plus additional 0.5A if terminated)

Operating Temperature

0 ºC to 70 ºC, 95% humidity, non-condensing

Communications Interface

50-pin Pamux bus

Analog Read/Write Access Time

70 µsec per channel, 1.12 msec per 16 channels
(channels accessed individually)

Digital Read/Write Access Time

2 µsec per channel, 2 µsec per 8 channels
(channels accessed in banks of 8)

Update Time

With digital functionality enabled:
  Analog channels updated every 20 msec
  Digital channels updated every 1.25 msec
Without digital functionality:
  Analog channels updated every 2 msec

Range: Multidrop

Up to 500 feet

LED Indicators

ACC (Access), STS (Status), SEL (Address selected),
WD (Watchdog), and RUN (Power On)

Options: Jumper Selectable

Address
Watchdog
Reset
Enable digital (B4)
Analog configuration mode

 

SNAP High-Speed Analog/Digital Pamux Brain Data Sheet

*** This product is Obsolete and no longer available. ***

The SNAP-B6 is a high-speed, addressable brain board that can remotely control a mix of both analog and digital I/O modules using the Pamux protocol.

CE Declaration: Low Voltage

This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with the mentioned European, international and/or national standards and regulations.

AutoCAD Drawings

This file contains AutoCAD drawings of Opto 22 products dating from 1988 to 2003. These are the same drawings that have been available on our BBS. Included is an Excel file describing the file names and relevant Opto 22 part numbers.

PamScan for MS-DOS

PamScan for MS-DOS is a software utility for troubleshooting Pamux hardware.

Before you download, read the Legal Agreement.

PamScan for Windows 8/7/Vista (32-bit)

PamScan for Windows 8/7/Vista (32-bit) is a software utility for troubleshooting PAMUX hardware.

Before you download, read the Legal Agreement.

PamScan for Windows 8/7/Vista (64-bit)

PamScan for Windows 8/7/Vista (64-bit) is a software utility for troubleshooting Pamux hardware.

Before you download, read the Legal Agreement.

PamScan PCI for Windows XP/2000

PamScan PCI Windows XP/2000 is a software utility for troubleshooting PAMUX hardware.

Before you download, read the Legal Agreement.

No videos or demos are available for this product.