G4PB32H
Hover over image to zoom in

G4PB32H

$289.00 (USA and Canada only)

Availability: In stock
G4 32-channel Rack W/header Connector For B4 Brain

Production Specification

G4 I/O family

The G4PB32H I/O mounting rack accommodates up to 32 G4 I/O modules. This I/O rack has a header connector and is designed to be used with one of the following brain boards:
  • G4EB2—Connects to an Ethernet network and uses the OptoMMP protocol
  • B4—Connects to a serial network and uses the Pamux protocol
This rack requires 5 VDC logic I/O modules and supports negative-true logic only (zero voltage = ON, and Vcc = OFF).

Barrier strips with screw terminals provide the field connections. A two-position screw terminal for 5 VDC connects to a power supply. For easier wiring, use the G4STRAPB.

Operating
temperature:

0 to 70 °C
95% humidity, non-condensing

Interface connectors:
Field
Control
Power

 

Screw-type terminal strip accommodates up to 10 AWG wire
Boxed header accepts a PAMUX B4 brain board
Screw-type terminals accommodate up to 10 AWG wire

Communications

Two 50-pin header on connectors for the PAMUX bus

Agency approvals:

UL, CSA, CE, RoHS, DFARS; UKCA

Warranty:

30 months from date of manufacture

G4 Digital 32-Channel Rack Data Sheet

The G4PB32H I/O mounting rack can accommodate up to 32 Generation 4 digital I/O modules. It has a header connector and is typically used with a PAMUX B4 Brain Board.

G4 Digital I/O Data Book

The G4 Digital I/O Data Book provides complete details on every G4 digital I/O product component, including adapter cards, I/O modules, and mounting racks.

UKCA Declaration of Conformity (EMC, LVD, RoHS)

This document is the Manufacturer's Declaration of Conformity for the products listed herein, in accordance with the rules, regulations and standards of the United Kingdom. The models cited have been tested to the essential requirements listed in the Standards section, and fully comply with the legislation as listed in UK Legislation section.

Declaration of Conformity (EMC, LVD, RoHS)

This document is the Manufacturer's Declaration of Conformity for the products listed herein, in accordance with European, international, and/or national standards and regulations.

Opto 22 RoHS 3 Statement of Compliance - Restriction of Hazardous Substances

This document is a statement of compliance with the EU Directive 2015/863/EU, Restriction of Hazardous Substances (RoHS 3). This document lists Opto 22 products that comply with the substance restrictions of the RoHS 3 directive.

UL Approval Document

This document lists all Opto 22 part numbers that have the Underwriters Laboratory (UL) approval.

CE Declaration: Component

This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with the mentioned European, international and/or national standards and regulations.

CE Declaration: Low Voltage

This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with the mentioned European, international and/or national standards and regulations.

No downloads are available for this product.
No videos or demos are available for this product.