KB86749
Published: June 30, 2017
Revision: 2.0

PAC Display Pro: Sometimes the secondary scanner field should be blank (but it's not)


Applies To:

PAC Display Professional

Versions Affected:

Versions affected: R9.5a through R9.6d
Problem is fixed in version: R9.6e

Resolved In Version:

Problem is fixed in version: R9.6e


Symptoms:

In the Configure Secondary Scanner dialog box (Configure > Secondary Scanner Location), sometime a value is displayed in the secondary scanner field when, in fact, the selected primary scanner isn't configured for a secondary scanner.



This issue happens only when you first select a primary scanner that does  have a secondary scanner, and then select a primary scanner that doesn't  have a secondary scanner.
When this happens, the Configured Secondary field should be cleared (but it isn't).

Note: This issue doesn't affect how the project functions in Runtime; it relates only to what should be displayed in PAC Display Configurator.

Resolution:

Opto 22 has resolved this issue.

Questions?

Contact: Opto 22 Product Support.
Phone: 800-835-6786 or 951-695-3080
Email: support@opto22.com


DISCLAIMER

This Opto 22 Knowledge Base ('OptoKB') article is intended to provide general technical information on a particular subject or subjects and is not an exhaustive treatment of such subjects. Accordingly, the information in this OptoKB article is not intended to constitute application, design, software, or other professional engineering advice or services. Opto 22 may modify the OptoKB articles at any time. Before making any decision or taking any action which might affect your equipment, you should consult a qualified professional.

OPTO 22 DOES NOT WARRANT THE COMPLETENESS, TIMELINESS, OR ACCURACY OF THE DATA CONTAINED IN THIS OPTOKB ARTICLE AND MAY MAKE CHANGES THERETO AT ANY TIME AT ITS SOLE DISCRETION WITHOUT NOTICE. FURTHER, ALL INFORMATION CONVEYED HEREBY IS PROVIDED TO USERS 'AS IS.' IN NO EVENT SHALL OPTO 22 BE LIABLE FOR ANY DAMAGES OF ANY KIND INCLUDING DIRECT, INDIRECT INCIDENTAL, CONSEQUENTIAL, LOSS PROFIT, OR DAMAGE, EVEN IF OPTO 22 HAS BEEN ADVISED ON THE POSSIBILITY OF SUCH DAMAGES.

OPTO 22 DISCLAIMS ALL WARRANTIES WHETHER EXPRESSED OR IMPLIED WITH RESPECT TO THE INFORMATION (INCLUDING HARDWARE, SOFTWARE, AND/OR FIRMWARE) PROVIDED HEREBY, INCLUDING THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTIBILITY, AND NON-INFRINGEMENT. Note that certain jurisdictions do not sanction the exclusion of implied warranties: thus, this disclaimer may not apply to you.

Copyright © 2024 Opto 22. All rights reserved.