KB86306
Published: October 31, 2016
Revision: 1.1

In iPAC and aPAC, digital output points may be categorized as analog input points


Applies To:

SNAP-PAC-S1
SNAP-PAC-S1-FM
SNAP-PAC-S1-W
SNAP-PAC-S2
SNAP-PAC-S2-W
SNAP-PAC-R1
SNAP-PAC-R1-FM
SNAP-PAC-R1-W
SNAP-PAC-R1-B
SNAP-PAC-R2
SNAP-PAC-R2-FM
SNAP-PAC-R2-W
SOFTPAC

Versions Affected:

Versions affected: PAC firmware R9.5a through R9.5c

Resolved In Version:

PAC Firmware R10.0d


Symptoms:

Note: This issue affects only the way digital output points may be displayed in iPAC and aPAC. Other types of points are not affected.

When using iPAC or aPAC, if you have turned on the "I/O Via Controller" option and your controller has one of the affected PAC firmware versions, digital output points may be displayed under the Analog Input Points category. When this happens, the digital output's status is displayed as either -1.00 (for On) or 0.00 (for Off).

Resolution:

Opto 22 has resolved this issue.

Questions?

Contact: Opto 22 Product Support.
Phone: 800-835-6786 or 951-695-3080
Email: support@opto22.com


DISCLAIMER

This Opto 22 Knowledge Base ('OptoKB') article is intended to provide general technical information on a particular subject or subjects and is not an exhaustive treatment of such subjects. Accordingly, the information in this OptoKB article is not intended to constitute application, design, software, or other professional engineering advice or services. Opto 22 may modify the OptoKB articles at any time. Before making any decision or taking any action which might affect your equipment, you should consult a qualified professional.

OPTO 22 DOES NOT WARRANT THE COMPLETENESS, TIMELINESS, OR ACCURACY OF THE DATA CONTAINED IN THIS OPTOKB ARTICLE AND MAY MAKE CHANGES THERETO AT ANY TIME AT ITS SOLE DISCRETION WITHOUT NOTICE. FURTHER, ALL INFORMATION CONVEYED HEREBY IS PROVIDED TO USERS 'AS IS.' IN NO EVENT SHALL OPTO 22 BE LIABLE FOR ANY DAMAGES OF ANY KIND INCLUDING DIRECT, INDIRECT INCIDENTAL, CONSEQUENTIAL, LOSS PROFIT, OR DAMAGE, EVEN IF OPTO 22 HAS BEEN ADVISED ON THE POSSIBILITY OF SUCH DAMAGES.

OPTO 22 DISCLAIMS ALL WARRANTIES WHETHER EXPRESSED OR IMPLIED WITH RESPECT TO THE INFORMATION (INCLUDING HARDWARE, SOFTWARE, AND/OR FIRMWARE) PROVIDED HEREBY, INCLUDING THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTIBILITY, AND NON-INFRINGEMENT. Note that certain jurisdictions do not sanction the exclusion of implied warranties: thus, this disclaimer may not apply to you.

Copyright © 2024 Opto 22. All rights reserved.