KB85952
Published: June 30, 2016
Revision: 2.0

Optomux responses on E1/E2 may be delayed


Applies To:

E1
E2

Versions Affected:

Problem affects versions: All versions
Problem is fixed in version: Firmware R1.2b

Resolved In Version:

Problem is fixed in version: Firmware R1.2b


Symptoms:

On an E1 or E2 brain board, Optomux responses containing more than 64 ASCII characters may be delayed by 100+ milliseconds. Commands that return return four ASCII characters of data per module and request all module positions are likely to trigger this issue. Command examples:

  • On an E1: Read Counters, Command W
  • On an E2: Read Analog Inputs, Command L

    Workaround:

    Send commands that cause responses of 64 ASCII characters or fewer. For the commands indicated in Symptoms, read up to 8 modules at a time.

    Resolution:

    Opto 22 has resolved this issue.

    Questions?

    Contact: Opto 22 Product Support.
    Phone: 800-835-6786 or 951-695-3080
    Email: support@opto22.com


    DISCLAIMER

    This Opto 22 Knowledge Base ('OptoKB') article is intended to provide general technical information on a particular subject or subjects and is not an exhaustive treatment of such subjects. Accordingly, the information in this OptoKB article is not intended to constitute application, design, software, or other professional engineering advice or services. Opto 22 may modify the OptoKB articles at any time. Before making any decision or taking any action which might affect your equipment, you should consult a qualified professional.

    OPTO 22 DOES NOT WARRANT THE COMPLETENESS, TIMELINESS, OR ACCURACY OF THE DATA CONTAINED IN THIS OPTOKB ARTICLE AND MAY MAKE CHANGES THERETO AT ANY TIME AT ITS SOLE DISCRETION WITHOUT NOTICE. FURTHER, ALL INFORMATION CONVEYED HEREBY IS PROVIDED TO USERS 'AS IS.' IN NO EVENT SHALL OPTO 22 BE LIABLE FOR ANY DAMAGES OF ANY KIND INCLUDING DIRECT, INDIRECT INCIDENTAL, CONSEQUENTIAL, LOSS PROFIT, OR DAMAGE, EVEN IF OPTO 22 HAS BEEN ADVISED ON THE POSSIBILITY OF SUCH DAMAGES.

    OPTO 22 DISCLAIMS ALL WARRANTIES WHETHER EXPRESSED OR IMPLIED WITH RESPECT TO THE INFORMATION (INCLUDING HARDWARE, SOFTWARE, AND/OR FIRMWARE) PROVIDED HEREBY, INCLUDING THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTIBILITY, AND NON-INFRINGEMENT. Note that certain jurisdictions do not sanction the exclusion of implied warranties: thus, this disclaimer may not apply to you.

    Copyright © 2024 Opto 22. All rights reserved.