PAC Control's Inspect window shows incorrect data for 64-bit integer tables in subroutines

Applies To:

SNAP-PAC-S1
SNAP-PAC-S1-FM
SNAP-PAC-S1-W
SNAP-PAC-S2
SNAP-PAC-S2-W
SNAP-PAC-R1
SNAP-PAC-R1-FM
SNAP-PAC-R1-W
SNAP-PAC-R1-B
SNAP-PAC-R2
SNAP-PAC-R2-FM
SNAP-PAC-R2-W
SOFTPAC

Versions Affected:

Versions affected: Firmware R9.3e through R9.4b
Lower versions may be affected
Problem is fixed in version: PAC Firmware R9.4c

Resolved In Version:

Problem is fixed in version: PAC Firmware R9.4c

Symptoms:

NOTE: This is a firmware issue that affects how PAC Control's Inspect window displays data for local 64-bit integer tables in subroutines. It doesn't affect the actual data and it doesn't affect 32-bit tables, local 64-bit variables, or global 64-bit integer tables.

When you use PAC Control's Debug mode to inspect a local 64-bit integer table in a subroutine, the values in the Inspect window appear as zeroes or random data.

Workaround:

Do not inspect 64-bit tables in subroutines.

Resolution:

Opto 22 has resolved the issue.

Questions?

Contact: Opto 22 Product Support.
Phone: 800-835-6786 or 951-695-3080
Email: support@opto22.com

DISCLAIMER

This Opto 22 Knowledge Base ('OptoKB') article is intended to provide general technical information on a particular subject or subjects and is not an exhaustive treatment of such subjects. Accordingly, the information in this OptoKB article is not intended to constitute application, design, software, or other professional engineering advice or services. Opto 22 may modify the OptoKB articles at any time. Before making any decision or taking any action which might affect your equipment, you should consult a qualified professional.

OPTO 22 DOES NOT WARRANT THE COMPLETENESS, TIMELINESS, OR ACCURACY OF THE DATA CONTAINED IN THIS OPTOKB ARTICLE AND MAY MAKE CHANGES THERETO AT ANY TIME AT ITS SOLE DISCRETION WITHOUT NOTICE. FURTHER, ALL INFORMATION CONVEYED HEREBY IS PROVIDED TO USERS 'AS IS.' IN NO EVENT SHALL OPTO 22 BE LIABLE FOR ANY DAMAGES OF ANY KIND INCLUDING DIRECT, INDIRECT INCIDENTAL, CONSEQUENTIAL, LOSS PROFIT, OR DAMAGE, EVEN IF OPTO 22 HAS BEEN ADVISED ON THE POSSIBILITY OF SUCH DAMAGES.

OPTO 22 DISCLAIMS ALL WARRANTIES WHETHER EXPRESSED OR IMPLIED WITH RESPECT TO THE INFORMATION (INCLUDING HARDWARE, SOFTWARE, AND/OR FIRMWARE) PROVIDED HEREBY, INCLUDING THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTIBILITY, AND NON-INFRINGEMENT. Note that certain jurisdictions do not sanction the exclusion of implied warranties: thus, this disclaimer may not apply to you.