Opto 22

43044 Business Park Drive, Temecula, CA 92590 USA
Local & outside the USA:(951) 695-3000
Toll-Free within the USA:(800) 321-6786
Fax: (951) 695-3095
Email: sales@opto22.com
 
KB84793
InfoKB: Periodic hardware replacement for preventive maintenance
Revision:  1.0
Published:  5/27/2015
Applies To
G4REG
G4A8R
G4A8L
G4D16L (REPAIR ONLY)
G4D16LS(repairsonly)
G4D16R
G4D32EB2
G4D32RS
G4LAX
G4RAX
G4BATT32
G4LC32
G4LC32SX
M4
M4 I/O
SNAP-LCM4-FM
SNAP-LCM4
SNAP-LCSX
SNAP-LCSX-PLUS
M4RTU
G4LC32ISA
G4LC32ISA-LT
SNAP-ENET-RTC
RTCBATT
Versions
See Description  

DESCRIPTION

Routine preventive maintenance is recommended for most automation equipment, including Opto 22 hardware. With a little care, your Opto 22 hardware will continue to work for many years.

We recommend replacing the following parts as shown:

  • G4REG Brick Power Regulator: Replace every 10 years.
  • G4BATT32 3.6 VDC Battery for Classic Controllers: Replace every 5 years.
  • RTCBATT 3.6 VDC Battery for SNAP-ENET-RTC: Replace every 5 years.

G4REG is used in the following products:

  • G4A8L
  • G4A8R
  • G4D16L
  • G4D16LS
  • G4D16R
  • G4D32EB2
  • G4D32RS
  • G4LAX
  • G4RAX

G4BATT32 is used in the following products:

  • G4LC32
  • G4LC32SX
  • G4LC32ISA
  • G4LC32ISA-LT
  • M4
  • M4IO
  • M4RTU
  • SNAP-LCM4
  • SNAP-LCSX
  • SNAP-LCSX-PLUS

RTCBATT is used in the SNAP-ENET-RTC

Relevant Downloads
No relevant downloads have been specified.
Questions? Contact Opto 22 Product Support.
Phone: 800-835-6786 or 951-695-3080
Email: support@opto22.com

DISCLAIMER

This Opto 22 Knowledge Base ('OptoKB') article is intended to provide general technical information on a particular subject or subjects and is not an exhaustive treatment of such subjects. Accordingly, the information in this OptoKB article is not intended to constitute application, design, software, or other professional engineering advice or services. Opto 22 may modify the OptoKB articles at any time. Before making any decision or taking any action which might affect your equipment, you should consult a qualified professional.

OPTO 22 DOES NOT WARRANT THE COMPLETENESS, TIMELINESS, OR ACCURACY OF THE DATA CONTAINED IN THIS OPTOKB ARTICLE AND MAY MAKE CHANGES THERETO AT ANY TIME AT ITS SOLE DISCRETION WITHOUT NOTICE. FURTHER, ALL INFORMATION CONVEYED HEREBY IS PROVIDED TO USERS 'AS IS.' IN NO EVENT SHALL OPTO 22 BE LIABLE FOR ANY DAMAGES OF ANY KIND INCLUDING DIRECT, INDIRECT INCIDENTAL, CONSEQUENTIAL, LOSS PROFIT, OR DAMAGE, EVEN IF OPTO 22 HAS BEEN ADVISED ON THE POSSIBILITY OF SUCH DAMAGES.

OPTO 22 DISCLAIMS ALL WARRANTIES WHETHER EXPRESSED OR IMPLIED WITH RESPECT TO THE INFORMATION (INCLUDING HARDWARE, SOFTWARE, AND/OR FIRMWARE) PROVIDED HEREBY, INCLUDING THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTIBILITY, AND NON-INFRINGEMENT. Note that certain jurisdictions do not sanction the exclusion of implied warranties: thus, this disclaimer may not apply to you.

Copyright © 2017 Opto 22. All rights reserved.

My.Opto22

All Opto22

Request Information
  • FREE Product Brochure
  • Product Demonstration
  • PreSales Engineering Assistance

Opto 22 Product Support

Opto 22 Product Support is FREE Monday through Friday 7 a.m. to 5 p.m. Pacific Time

Product Support Numbers:

Local: (951) 695-3080
Toll-Free: (800) 835-6786
Fax: (951) 695-3017
support@opto22.com

Products

None

Downloads

None

Documents

None