KB81042
Published: August 23, 2010
Revision: 2.0

BIT suffix added to non-integer variable when using Edit > Replace, 'Bit index' Offset command


Applies To:

PAC Display Professional
PAC Display Basic

Versions Affected:

Problem was discovered in version: R9.0c
Problem is fixed in version: R9.0d

Resolved In Version:

Problem is fixed in version: R9.0d


Symptoms:

If the Edit > Replace command in Configurator is used with the Offset By option, then other tags that are not integers, are modified within the tag field to appear as if they also have a BIT index.

For example, a graphic with assigned attributes is selected (sizing handles are visible around it). The Edit > Replace command is selected and configured so that the Chosen graphics will offset the currently configured bit index by 2. After clicking OK, if a float variable, for example Analog_Input_1, is also assigned to the graphic, the variable is changed to appear as Analog_Input_1.BIT02.


Questions?

Contact: Opto 22 Product Support.
Phone: 800-835-6786 or 951-695-3080
Email: support@opto22.com


DISCLAIMER

This Opto 22 Knowledge Base ('OptoKB') article is intended to provide general technical information on a particular subject or subjects and is not an exhaustive treatment of such subjects. Accordingly, the information in this OptoKB article is not intended to constitute application, design, software, or other professional engineering advice or services. Opto 22 may modify the OptoKB articles at any time. Before making any decision or taking any action which might affect your equipment, you should consult a qualified professional.

OPTO 22 DOES NOT WARRANT THE COMPLETENESS, TIMELINESS, OR ACCURACY OF THE DATA CONTAINED IN THIS OPTOKB ARTICLE AND MAY MAKE CHANGES THERETO AT ANY TIME AT ITS SOLE DISCRETION WITHOUT NOTICE. FURTHER, ALL INFORMATION CONVEYED HEREBY IS PROVIDED TO USERS 'AS IS.' IN NO EVENT SHALL OPTO 22 BE LIABLE FOR ANY DAMAGES OF ANY KIND INCLUDING DIRECT, INDIRECT INCIDENTAL, CONSEQUENTIAL, LOSS PROFIT, OR DAMAGE, EVEN IF OPTO 22 HAS BEEN ADVISED ON THE POSSIBILITY OF SUCH DAMAGES.

OPTO 22 DISCLAIMS ALL WARRANTIES WHETHER EXPRESSED OR IMPLIED WITH RESPECT TO THE INFORMATION (INCLUDING HARDWARE, SOFTWARE, AND/OR FIRMWARE) PROVIDED HEREBY, INCLUDING THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTIBILITY, AND NON-INFRINGEMENT. Note that certain jurisdictions do not sanction the exclusion of implied warranties: thus, this disclaimer may not apply to you.

Copyright © 2024 Opto 22. All rights reserved.